Jump to content

Upcoming Eta Part Restrictions


Recommended Posts

First of all, sorry I don't have the specifics on hand right now, I recently got a newsletter through from the British guild of watch and clockmakers at work confirming and updating a nagging fear about ETA part restrictions, they announced a date, which if no one else can provide I'll make sure to post it tomorrow when I can read it again.

As far as I can tell, they plan on no longer providing any spare parts to anyone other than Swatch and the various Swiss watchmaking houses that they manage. 

God I see so many problems across the industry with this, I just don't know how any of this will work out.

Anyone have any insights into the situation?

Edited by Ishima
Link to comment
Share on other sites

Well it's not really that simply, no one wants to use Chinese movements/parts, and it leaves the issue of current watches that are fitted with ETA movements, which makes the majority of the upper market of watches, what are we to do about them, just do straight movement exchanges, or keep a bench of movements for salvage, either way, it will make horology more difficult and more expensive.  

Edited by Ishima
Link to comment
Share on other sites

I know independents here that have been posting signs in their shops about this since the courts found against the SWATCH group. A number of them have been stockpiling mountains of eta parts and have been supplementing with Chinese parts. One I know has a big sign that says all replacement parts will be Chinese origin unless the customer specifically requests Swiss.

Link to comment
Share on other sites

There's a good article on how eta painted themselves into a corner. Can't find it now but will keep looking.

By virtue of being the biggest supplier of movements and parts, they could not refuse to supply their products to all comers!

Anil

Link to comment
Share on other sites

There's been quite a long discussion about this here in the past. As I've said before, there will be three probable effects (IMO) on the watch world:

 

1. Repairers will stock s/h parts and the desirability of s/h ETA movements on eBay and other sources will rise

2. Chinese and Japanese watches will kick off in an even bigger way

3. More brand makers will do deals with independent Swiss manufacturers outside the Swatch group.

 

Greed will eventually take its toll...

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • So I found what I believe is the setting lever screw! Am I right in thinking the screw next to the click is the correct one for the setting lever? However if it is, it doesn't fit in the hole which I believe is for it! I can get the lever to sit nicely on the stem and line up with a hole, but the screw only goes as far as the shoulder and stops. It's as though the hole is too small! The dial side has been disassembled by the way, the other wheels are in my tray
    • When faced with say a pocket watch bridge which is cracked, silver soldering to repair is often the only option (hopefully someone wasn't there before hand with soft solder). I can generally do this succesfully and tidily with a small torch and miniscule pieces of silver solder, but on parts which were mercury amalgam gilded the heat can have have a deleterious effect on the finish.   I keep wondering if there's a good way to refinish these - and despite having the needful items would rather avoid using the mercury process.   In the past for electronic work I've gold plated PCBs but this involved gold potassium cyanide solution, which also doesn't realy belong at home. I've read that there are now safer alternatives but couldn't find more detail (and importantly how similar are the results to amalgam gilding, since I wouldn't want to refinish the whole watch). Pointers would be very welcome (and yes, I know solutions containing gold won't be cheap!) Alan
    • The first one is an Unruh max stake for pushing out staffs
    • Ok so with the great answers for my previous question may I ask what these two attachments are used for. The one with the red knob is I assume used for hand setting the seconds hand? Jon      
    • According to Cousins site I need to look at document G22 as I think I need an ATGB at 304 but I cant find this size in G22 doc. The last thing I want to do is order the wrong one😳  Unless I cant see the wood for the trees 😆 I could be looking at the wrong style, I assume its classed as Round plastic Armed  https://www.cousinsuk.com/product/wide-ring-gold-atgb
×
×
  • Create New...