Jump to content

Recommended Posts

Posted (edited)

The title says all - I feel not the tiniest bit of a shame about what I am going to reveal: for years and years, in our kitchen I, personally, hanged these two clocks (shown on the pictures). AND I am not ashamed at all. :cool:

 

I do, however, have several good reasons behind all this:

 

1. They were ridiculously cheap, I mean there were no cheaper clocks. The little blackish one cost AU$2.50 and the other woody was AU$ 3.00. I got them from that all cheap or $2.00 'dola' shop.

 

2. They keep really good time (as you all know about quartz).

 

3. In the blackish AA battery lasts about 3 (two) years!, the woody eats up one AA in about 8-9 months.

 

4. They are in the kitchen were there is steam, oil and fat vapors, all sorts of herbs breathing at them and the temperature jumps about like mad.

 

So there. :)

 

ps.

 

I hope you believe me that I set the same time (to a second) about six months ago while changing battery. I did not touch the setting since.

post-335-0-81282100-1428632119_thumb.jpg

Edited by zenon
Posted

No shame at all Zenon. I've even repaired two of these beasties in the last year, how bad is that!

It's what us old codgers do. B)

  • Like 1
Posted
  Quote

 

  I've even repaired two of these beasties in the last year, how bad is that! 

 

A picture is worth a 1000 words....how about 3 pictures! :)

 

post-253-0-45841200-1428686344.jpg post-253-0-68592600-1428686345.jpg post-253-0-53365400-1428686346.jpg

 

Kitchen, bedroom and bathroom! All fixed and repaired by yours truly,,, and proud of it!

 

:D

 

Cheers,

 

Bob

  • Like 1
Posted

Yeah, it is supposed to, it is a Fast Clock...identified by the guy on the dial...always running! :D I've told him not to push the minute hands but he never listens!

  • Like 2
Posted (edited)

The three clocks cannot shows the same time or Bob broke a physic law. He cannot be at three different places at the same time to get the photos  :D

Cheers.

Ricardo

Edited by RicardoG
  • Like 1
Posted

This all brings me to the question of what is good or bad taste, be it fashion, motorcycles, cars, watches, err stuff in general - even wall clocks. It seem that all things (in general) improve with age:


 


Year 1: Cutting edge. "I really want that its the height of fashion"


 


Year 2: So last year. "Not my thing anymore"


 


Year 10: Old tech. "What was I thinking"


 


Year 20: Take it down the dump/recycling centre. "Did I really have taste that bad"


 


Year 30: Keep it might be worth something soon. "I used to have one of those"


 


Year 50: Vintage, flog it on fleabay. "I wish I had one of those"


 


Year 100: Antique, flog it at Sotherby's and retire on the proceeds. "I really want that and I am willing to mortgage everything, sell the wife, kids, cat & dog into slavery just to own it"


 


2-20 year old wall clock? Probably best avoided but should improve with age. No shame in that.


  • Like 2
Posted
  On 4/10/2015 at 5:41 PM, bobm12 said:

Yeah, it is supposed to, it is a Fast Clock...identified by the guy on the dial...always running! :D I've told him not to push the minute hands but he never listens!

I guess this one is in your bathroom to speedup showers - very nice way to save precious water. I got an idea to place one, the faster one,  in the kitchen so we can have home made fast food. :)

Posted
  On 4/10/2015 at 8:56 PM, RicardoG said:

The three clocks cannot shows the same time or Bob broke a physic law. He cannot be at three different places at the same time to get the photos  :D

Cheers.

Ricardo

Well, if Bob is very, very fast or got a dispensation from Albert Einstein he would be able to take the photos. :D

Posted
  On 4/10/2015 at 10:10 PM, Blacklab said:

 

This all brings me to the question of what is good or bad taste, be it fashion, motorcycles, cars, watches, err stuff in general - even wall clocks. It seem that all things (in general) improve with age:

 

Year 1: Cutting edge. "I really want that its the height of fashion"

 

Year 2: So last year. "Not my thing anymore"

 

Year 10: Old tech. "What was I thinking"

 

Year 20: Take it down the dump/recycling centre. "Did I really have taste that bad"

 

Year 30: Keep it might be worth something soon. "I used to have one of those"

 

Year 50: Vintage, flog it on fleabay. "I wish I had one of those"

 

Year 100: Antique, flog it at Sotherby's and retire on the proceeds. "I really want that and I am willing to mortgage everything, sell the wife, kids, cat & dog into slavery just to own it"

 

2-20 year old wall clock? Probably best avoided but should improve with age. No shame in that.

 

:D  very nice! Had a good laugh. I wander if there is anything we could do to jump the unpleasant 2-20 year period? We do fiddle with time and at least one of us can make the time 'stand still' so why not crank it up? ;)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hello everyone from Idaho. I started up the hobby about two years ago and love it. My latest repair, that I'm very proud of, is an Oris big crown pointer date 7400B. I'm excited to learn and to help out where I can.
    • Welcome to the forum. You need a 393-00598.  
    • An update... I bought some 316 steel washers from McMaster Carr. For days I have been turning it to get to what you see in the image.  it is not done, of course.  the inside diameter of the top as shown is close. The washer is too thick, so I am gonna need to figure a way to make it thinner. Last week I had a long talk on the phone with @SwissSeiko and got some tips. He suggested Harbor Freight insertable carbide cutters. Wow, they work well. Miles to go before I sleep. Here is my setup
    • Hello all.  I've been working on a Citizen H145-S073545 radio controlled. There was a plastic gasket in between the case and case back. Putting it back together I used a press, witch I think was a mistake, because it cut the gasket open. I've been looking online for a replacement but not having much luck. I've tried a couple crysta gaskets but that didn't work.  Any ideas of where to find these gaskets? Thanks all.
    • Yes I think blue thread locker would help you out here. You will lose the safety mechanism if the mainspring snaps, which risks damage to train wheel teeth. But your watch might run. You can maybe try inserting a hair inside the pinion and threading it on. That might give it just enough to grab hold without thread locker. Or a tiny piece of superfine copper wire, a strand from some stranded electronics wire.
×
×
  • Create New...