Howsaboutabitofreading
-
Similar Content
-
-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
-
Posts
-
To lubricate it you'll need to completely disassemble it along with removing the hands. If you're going to do that then you may as well just get a new movement. -
I'm surprised it dissolved so quick in such a weak solution. I use about 20 to 25g in 100ml of water so 1:5/1:4 and at 40Deg it takes about 5 Days to dissolve a stem.
-
-
By steve1811uk · Posted
Hi All, After 5 years in this wonderful hobby I am about to service my first Rolex. It's a 3135 movement (36mm Datejust approx. 1990) belonging to a friend, a very trusting friend. I am slightly concerned that my cleaning fluid might eat the gold lettering on the movement bridges. Fluid is L + R Ammoniated and does a great job of cleaning. I usually do 5 minutes at 50 degrees in the ultrasonic followed by 2 x 5 minute rinse in the L + R rinse fluid. Does anyone have experience here and know if it is safe to go ahead? Thanks, Steve -
Hello everyone, I'm new to the forum and am excited to learn as much as possible from you all as I embark on this new love of mine - working with watches! Looking forward to meeting you all. Mike
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.