Jump to content

Russian (soviet) movements parts source


Almach9

Recommended Posts

Hello,

 

Few weeks ago I have purchased few soviet era movements for training purposes - cal. 2209, 2609 and 2614.2h.

So, those movements came as described, not working, on some of them balance is moving. The most important, I noticed, that all movements are with missing shockproof spring.

Now is my question. Where I can buy spare Shockproof springs? I am living in UK.

Link to comment
Share on other sites

For Russian watches I think Ebay is your best bet. I guess Sekondas were sold in the West but really, on Ebay you can get 4-5 movements, some with good balances, for $20. Now when I do a Russian movement I just buy a bunch of scrappers because it's anyone's guess which parts will be shot, which will be missing, etc. I then try to Frankenstein the best movement I can.

Edited by JohnC
  • Like 1
Link to comment
Share on other sites

Also try etsy.com there are some Soviet watches being sold for parts.

 

Last week the watchmaker damaged my sentimental mint condition Soviet Slava watch and I am heartbroken.  I found a similar part on etsy... so it may work for you...

If anyone knows where to find a new bezel in the picture please let me know! Los Angeles doesn't have a single reputable watchmaker ? my fault for taking it there. 

 

before and after are below 

IMG_2553.PNG

IMG_2554.JPG

  • Thanks 1
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • The part was how it fell out of the movement - the train wheel bridge wasn’t screwed in.    I’ll probably dismantle the part, if I can, to work it out.    The train of wheels ran fine - it was only once the keyless works were installed I noticed the problem. 
    • Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
    • thinking of where epilam should be removed did you know there was a patent that covers this? At least for the escapement I'm attaching it. GB1057607A-1 epilame.pdf
    • Back home...printing now.  Will report results
×
×
  • Create New...