Jump to content

Smiths Ty

Blacklab

By Blacklab
in Your Watch Collection

 Share

Recommended Posts

Blacklab Distinguished Member

Blacklab

Posted
Posted

Just finished refurbing a tired Smiths TY believed to be from 1965:

 

Before:

post-80-0-30550800-1427146755_thumb.jpg

 

After:

post-80-0-60806800-1427146786_thumb.jpg

 

Case, dial & hands cleaned. Crystal polished. Movement serviced & broken click spring replaced (thanks to John at Obsolete Clock & Watch Parts). New strap. The timegrapher readings were a little variable, however it kept good time all weekend.

 

I am getting a bit of a thing for Smiths (the watches, not the designer-misery band from the 1980's) and have got myself a 1960 Astral to do after the next Seiko.

  • Like 9
Geo Distinguished Member

Geo

Posted
Posted

You know I have a soft spot for Smiths watches BL, and that's one I haven't seen. What a transformation, it looks great. Is there any chance of posting a snap of the engine room? :)

Blacklab Distinguished Member

Blacklab

Posted
  • Author
Posted

Thanks for the kind words, here's the innards before servicing:

post-80-0-71797000-1427149363_thumb.jpg

 

note the broken click. I normally take picks of the breakdown only for reassembly reference, I must start taking pics of the finished movement as well.

 

The only reason I think its a 1965 watch as its partially shown in an ad from that year reproduced in the book 'Smiths Watches' by Barrie Smith.

Blacklab Distinguished Member

Blacklab

Posted
  • Author
Posted

The case was treated to 20 mins in the ultrasonic with crystal in place (glued) using washing up detergent, a bit of scraping with pegwood and a final buff with a Selvyt gold polishing cloth. The crystal was rubbed up with Polywatch.

Blacklab Distinguished Member

Blacklab

Posted
  • Author
Posted

Thanks for posting the movement BL, it's a lot more basic than I had expected.

 

One up from the LY & 2 up from the RY as used in the Smiths Empire & Ingersol Triumph watches, made by the Anglo-Celtic Watch Co. (later called the Empire factory) in Wales - hence the 'Made in Great Britain' on the dial. The TY was produced in 1,5,7 or 21 jewel variants. The higher quality movements were produced in the Cheltenham factory & normally have 'Made in England' on the dial.

  • Like 1
  • 3 weeks later...
Blacklab Distinguished Member

Blacklab

Posted
  • Author
Posted

Thanks again to you all for the compliments. I finally got myself a couple of Smiths Astrals & will post results on a new thread soon.

Geo Distinguished Member

Geo

Posted
Posted

Thanks again to you all for the compliments. I finally got myself a couple of Smiths Astrals & will post results on a new thread soon.

That I'm looking forward to BL, they're one of my favourite watches! :)

  • 2 weeks later...
daz WRT Addict

daz

Posted
Posted

Great Job Blacklab,

 

I also love Smiths watches and Pocketwatches. I have just got in 2 rather nice Smiths Watches for my collection. Will have to put some pics up tomorrow

 

 

Best Wishes

 

Darren

  • 2 years later...
Ryan New Member

Ryan

Posted
Posted

Hello I have a couple of questions about this watch I also have this watch with the original strap and it’s in working order I’m finding it hard to find information about the watch this is the only thing I have found so far 

my first question is how much is the watch worth 

my second question is is it with getting refurbished 

Pip WRT Addict

Pip

Posted
Posted

That's a great job @Blacklab , really nice end result. Can I ask what technique / kit you used to clean the dial? It looks so much better (partly due to the crystal I expect but even so). Have you had it on a timegrapher? Just wondering what sort of figure you'd expect to get from one of these. My guess would be around +/- 1m a day would be a decent result?

Blacklab Distinguished Member

Blacklab

Posted
  • Author
Posted

Ryan - Some Smiths go for silly money unfortunately these don't tend to go for too much, best keep an eye on flebay sold listings to give you an idea of the value. As for refurbishment I think the costs would far outweigh the value, I just do them for fun. 

Pip - thanks for the kind words. The dial was in good condition, just a bit dirty. Sometimes Rodico alone can be used but if particularly bad clean with a sable brush with the dial immersed alternately in lighter fluid then and a weak washing up detergent/water solution and finally rinsed in water then thoroughly dried. I have posted in the past more extreme cleaning methods that have proved successful, but extreme caution needs to be taken & I would not recommend anything other than the most gentle of dusting with a dry sable brush if the watch is of reasonable value. The watch is still in my collection although I haven't worn it for a while, when originally serviced it ran at +/- 20s a day.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • JohnR725
      A lathe with indexing that won't break the bank?

      By JohnR725 · Posted

      interesting video nice to see the machine what it can do now I wonder what it costs and I'm sure it's not in my budget. Plus the video brought up questions but the website below answers the questions? What was bothering me was the size of his machine 4 mm because I thought it was bigger than that? But then it occurred to me that maybe they had variations it looks like four, seven and 10. With the seven and 10 being the best because way more tool positions in way more rotating tools. Although I bet you all the rotating tools are probably separate cost https://www.tornos.com/en/content/swissnano   Then as we been talking about Sherline. Just so that everyone's aware of this they have another division their industrial division where you can buy bits and pieces. I have a link below that shows that just in case you don't want to have the entire machine you just need bits and pieces. https://www.sherline.com/product-category/industrial-products-division/   Let's see what we can do with the concept I explained up above and bits and pieces. For one thing you can make a really tiny gear very tiny like perhaps you're going to make a watch. Then another version the center part is not separate it is all machined from one piece. Then fills gear cutting machines have gone through multiple of evolutions. A lot of it based on what he wanted to make like he was going to make a watch unfortunately eyesight issues have prevented that. Another reason why you should start projects like this much sooner when your eyesight is really good or perhaps start on watches first and then move the clocks then local we have from the industrial division? Looks like two separate motors and heads. Then it's hard to see but this entire thing is built on top of a much larger milling machine as a larger milling machine gave a very solid platform to build everything.   Then like everything else that had multiple generations are versions the indexing went through of course variations like above is one version and the one below was the last version. Now the version below I mentioned that previously and somewhere in the beginning to discussion and somebody else had one in their picture. As it is a really nice precision indexing. Then I wasn't sure if I had a the watch photos here is his unfinished watch. No he wasn't going to make a simple watch like none of his clocks were simply either what would be the challenge and that.    
    • Titanium
      Lab Coats

      By Titanium · Posted

      Use a Portwest Howie lab coat. They are the biological type so they have tapped cuffs so you don't end up getting the loose cuffs of normal lab coats catching everything. 
    • Titanium
      Chinese tools debate

      By Titanium · Posted

      Some of the Chinese tools ae great and can be purchased at a fraction of the price of Swiss ones, some are complete garbage and some I'm convinced are coming out the same factory as the branded ones.
    • caseback
      Calendar work certina 25-651

      By caseback · Posted

      I found this string about this problem. I've not gone through it all, but I believe it also mentions making a spring. If not in this string, the info is online.
    • tonydagee
      Calendar work certina 25-651

      By tonydagee · Posted

      No, I now realise it’s broken😥 ive looked for one online, but v. Expensive! im going to service as is, in the hope that  one turns up. Thank  you.
×
×
  • Create New...