Jump to content

Replacing a bezel on Animal Brand Watch


Recommended Posts

Dear All,

Please bear with me I'm new to this, have decided to try some basic repairs on some old watches that were lying in a draw. I need to replace the bezel on an old Animal Brand Dive type watch model no. W009 it's at least 20+ yrs old. As you can see from the photos I have managed to get the old bezel off but can't find any ideas on what to do next, although to be fair I'm probably not typing in the right questions. I was wondering if any of you could answer the following questions

1, Are bezels brand/ watch specific or generic

2, what measurements do you take to ensure the correct sized replacement

3,Can anyone recommend an online store to buy the replacement part

The photos are of the watch face and both sides of the removed bezel ( apologies for teaching my Granny), any other info you think might help much appreciated

Regards

Keith

IMG_1007.jpg

IMG_1008.jpg

IMG_1009.jpg

Link to comment
Share on other sites

This is a bit tricky, Animal, as far as i'm aware, have never actually supplied spare parts for their watches.
I don't know if generic replacement bezels are a thing, but I've seen a website before that supplies entire generic watch cases, so i can't be sure one way or the other. 
You might try eBay or something to look for another second hand version of this watch and cannibalise the bezel off of that. 

Why exactly do you need to replace the bezel, is it outwardly damaged and worn or is it the click on it has gone? because you might be able to do something with the spring underneath that's responsible for that. 

Edited by Ishima
Link to comment
Share on other sites

Hi  Ishima, thanks for the reply, I’ve looked round eBay and some are termed generic but wouldn’t know which size to order. You can send the watches away for repair but as you say I haven’t seen anybody selling specific Animal spares. I’ve seen a few  for sale on eBay but all more than I want to spend on a practice project.

Link to comment
Share on other sites

4 hours ago, Keith57 said:

1, Are bezels brand/ watch specific or generic

Specific, but some sizes are common enough.

4 hours ago, Keith57 said:

2, what measurements do you take to ensure the correct sized replacement

Dia and height of the section where it fits, if you're lucky a Seiko bezel might fit or almost, but if it needs adapting then it becomes complicated.

Link to comment
Share on other sites

Thanks jdm, by dia. I assume you mean the face it fits round so I can start having a look although from internet searches I did before posting makes me think it may be a bit more expensive than I want to pay to practice 

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I think we are about there, if there were still lots out there then the cost of a watch from 5 years ago would be around the same as it is now (allowing for inflation). Given that the price has gone up several times over we can only assume that supply cannot keep up with demand so we must be at or past peak supply, especially if the trend continues. I see even places like Australia, Ukraine and even South America are selling watches on eBay, picking over their stocks, mixed in with fakes and Frankenwatches etc.
    • I understand the demand bit, the generation below me 30ish are too technology engrossed to own a mechanical watch and they just dont like old stuff. I also consider myself at the getting on age of 57 to be a rare find of someone that likes old stuff, i did buy an almost 100 year old book yesterday titled " The New Modern Home " printed 1929.  Cost me a quid. What i was trying to work out is if we have reached a volume peak of watches being discovered hidden in the back of drawers.  Those watches that were hung onto until they entered the hands of the non sentimental generation. 
    • Even for myself who only started getting into watch repair/servicing during COVID I have seen a huge jump in watch prices - we have a 404 channel on this forum. When I started you could relatively easily find a watch on eBay to restore and put onto the channel, however this is now almost impossible and the only feasible solution is to buy a job lot with an average price <4.04. Even watches sold for parts/spares are 3 or four times the price of only a few years ago. Why - Either Demand must have increased in order to push up the price, or supply is reduced. I think it is a little of both, I think that most watches in the UK/US may have been picked over, which agrees with most of what @Neverenoughwatches says so supply of all kinds of vintage watches, including tat is dwindling. As a double whammy I think that more people are wanting watches, either to work on, or as a way to differentiate themselves from the Apple Watch and FitBit crowd. The upshot is that half decent watches that require restoration are now $500 instead of $100 and cheaper watches (Seiko 5 etc) are now $50 instead of $10, and even Mumbai Specials and garbage are now pushing $50 each. When - how long will this last, I think that most of the people who are returning to mechanical watches are those that have previously experienced life without them and want to return to something with a bit of personality that doesn't buzz every 10 seconds on your wrist and tell you how many steps you have done today. i.e. the 30-40+ generation. My son who is 17 has several mechanical watches but only wears one on a special occasion and is obviously only aware of them at all in part due to my hobby. I asked him the other day how many of his friends wear a watch and he told me that some use a smart watch but most just use their phones. So as I see it, demand will start to fall once the sub-thirty crowd start becoming the majority and/or the older amongst us stop buying watches and switch our attention to mobility scooters and trying to remember our bank password. Price - I think this is here to stay, even if demand does start to drop as the older generation becomes to decrepit and stops buying and the younger generation isn't interested in buying, supply will become progressively less as time goes on as more vintage watches become lost or broken beyond repair. I think the prices will plateau at some point as an equilibrium is reached as reduced demand is balanced with reduced supply, i.e. less and less people buying less and less watches. Sorry for the long ramble!
    • Hi. Use a PVA based glue, gorilla glue it dries transparent then do as advised by Old Hippy, smoothe down using very fine  0000 wire wool and either French polish or beeswax for a finish.
    • Hello and welcome to the forum.    Enjoy
×
×
  • Create New...