removing date click on ETA 2824-2 movement for a new date dial
-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
Posts
-
Knocked out another 404 last night...when you are in the zone! This watch was a non-runner which I picked up as part of a lot of 8 watches, so works out to be $3.12 per watch. Before: And the finished watch, new crown and stem and the crystal was cracked so was replaced. I also replaced the mainspring as the original was the old steel type spiral and very 'set' - all else is original: The Movement was a AS 1686, but in reading around a little the ACCRO watch company were sued for their use of the five point crown on their Jacques Pere range as it resembled Rolex, see below: ACCRO then reverted to just ACCRO on their watches - I have done some sniffing around the internet and haven't seen another example of ACCRO and the crown together on a dial so maybe I have something unusual, or maybe I was looking in the wrong places 🙂.
-
This watch was damaged when I got it. I didn't break the escape wheel pivot, and I bodged a fix with epoxy to see if I could get it running. I'm not yet ready to get into lathe work, or shellacking jewels, and may never be. But I'm learning plenty with each watch I tackle.
-
Thank you OH, appreciate your input.
-
Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement.
-
By Neverenoughwatches · Posted
Drat and double drat i was looking forward to the royalties on that idea.
-
Recommended Posts