Jump to content

Seiko Kinetic Titanium faulty capacitor?

Mudos

By Mudos
in Watch Repairs Help & Advice

 Share

Recommended Posts

Mudos Member

Mudos

Posted
Posted (edited)

I can buy a Seiko Kinetic Titanium from someone for around €50,- and I'm not sure if I should buy it or not at this price. The problem is that it has a very short reserve time, seller says it's less than 8 hours. I did some research and a common problem with these Kinetic watches is that the capacitor stops doing it's job and then needs to be replaced. I looked up how to replace the capacitor and I think I can manage to do that myself and learn a bit in the process. But it might not be the capacitor...? What do you guys think? What would the approximate price of a capacitor be for such a watch? Couldn't find what movement this watch has. The only info I have is that it's a Seiko SKA417P1 and this is how it looks:
 

 

seiko_.jpg

Edited by Mudos
Link to comment
Share on other sites
FLwatchguy73 Super WRT Addict

FLwatchguy73

Posted
Posted

It's almost a guarantee it's the capacitor. Just like a battery, they have a finite lifespan. This is the drawback to these kinetics and the citizen eco-drive. Be sure to get the exact one it calls for, they are very specific and won't work otherwise. 

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Part swapper to part maker

      By Neverenoughwatches · Posted

      Thanks Rich, its really not that difficult to make them, simple ones anyway. Cousins didn't have the part though i could find it on ebay at 6.50. I figure i earned about £1.50/ hr . It paid for the diamond files i bought.
    • mikepilk
      How to remove shock settings from Smiths 512 movement

      By mikepilk · Posted

      If you look at this thread, you can see I had exactly the same problems with balance springs with 2 prongs on a Smiths 627. The slots in the chaton were not big enough to get the ends of the spring out. I had to bend them to get them out and back in. Not ideal. I don't fancy having to do it again as they could easily break, and where would you find replacements? I didn't come across the 3 prong type.     
    • mikepilk
      Breguet Exhibition at London Science Museum

      By mikepilk · Posted

      I visited the Breguet Exhibition today. https://www.sciencemuseum.org.uk/about-us/press-office/rare-timepieces-unveiled-new-display-science-museum The Science Museum now holds the collection of "The Worshipful Company of Clockmakers" - "The collection includes more than 600 watches, 90 clocks, 30 marine chronometers and a number of fine sundials and examples of hand engraving, mapping the history of innovation in watch and clock making in London from 1600 to the present day." It's well worth a visit. They have some amazing pieces by the likes of Harrison, Breguet, Tompion etc . I've visited twice before but decided to go and see the Breguet Exhibition. Maybe I was expecting too much, as on reflection, "More than 20 extraordinary timepieces designed by inventor and watchmaker Abraham-Louis Breguet " isn't going to take up that much space. In reality, it's just one cabinet. But, Oh those watches, stunning 🤩 , e.g. (No 1297 was made for George III and is valued about £1m)   I tried a couple of pics, but with subdued lighting and taking through glass, they aren't good. I like thin hands on a watch - how about these (I think this is a split second chrono)   And this one, with all it's complications, is only 10mm thick !   What I found very interesting were a few very old machines for making watch parts, like this 17th Century gear cutter. The disc below has concentric rings with holes in, so that is can be set to cut varying teeth numbers.       
    • RobS
      How to remove shock settings from Smiths 512 movement

      By RobS · Posted

      Firstly sorry for poor image quality I only have an iPhone for photos.    Im working on a 512 movement and I’ve had some trouble with the “jewels”. I’ve got the metal one out, but when I tried to put it back the three sides of the spring seem to need pressing all at once to fit it as there are three “holes”. I get two corners in but as I go for the third the first two pop out! Constantly I’ve lost the spring. I’ve done the similar ones on seiko movements without trouble. Assuming I find it/a replacement, what am I missing!   on the other side with the only ruby in the movement is a setting with no “gap”at all. How do I get the spring out, and of course get it back in!    What am I missing!    thanks in advance.    Rob
    • Geotex
      Roland Ranfft RIP

      By Geotex · Posted

      Links like that are the reason I routinely donate to the Internet Archive - they are the last safe house for a tremendous amount of useful info that is otherwise lost.
×
×
  • Create New...