Jump to content

Effect Of Mainspring.


fjseal

Recommended Posts

Hello all, I am new to the forum.

Bearing in mind that the escapement controls the mainspring, if you put a random spring into a mechanical movement, could the wrong spring cause the watch to run ten minutes a day fast, or is it just likely to be the usual things like hairspring or magnetism.

Thanks.

Link to comment
Share on other sites

Hi Fj,

 

It kind of depends on how the rogue mainspring differs from the correct spec.

 

Too thick a mainspring can result in the balance amplitude being so great that the impulse jewel actually bounces off the outside of the pallet fork before the balance reverses its direction of rotation, I believe this is called over-banking. This bounce can impart extra speed to the balance which would speed up the rate and make the watch run fast. This is an easy condition to identify as all you have to do is listen to the watch. In normal operation the tick is nice and even, but if over-banking is happening then it sounds somewhat like a galloping horse. This is not good for the impulse jewel or the pallet fork horns.

 

Too thin a main spring can cause the balance amplitude to be too low. Surprisingly enough, a very low balance amplitude can also result in an increase in rate, as can often be observed in a watch where the mainspring is almost fully unwound.

 

That being said, the first place I look if a watch is gaining unacceptably is the hairspring. Check that no coils are stuck together and that there is nothing fouling the coils in any positions.

  • Like 1
Link to comment
Share on other sites

Thanks for all the replies. Will check your suggestions; magnetizer arrived today. By the way, did you know that each nineteen minutes spent crawling round on the floor looking for 'pinged parts' is one hour and ten minutes less in the gym. Old Horological Formula.

Link to comment
Share on other sites

 

By the way, did you know that each nineteen minutes spent crawling round on the floor looking for 'pinged parts' is one hour and ten minutes less in the gym.

So it actually saves time. I should be very fit by now! :)

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hello and welcome from Leeds, England. 
    • Hi,   My name is Simeon I am based in Sydney, Australia and have recently got into watch repair / watch making.  I am very much a learner having serviced multiple forgotten watches, some of which were actually successful!   I have a slowly growing collection of watches, mainly old Soviet, a few Japanese and (not pictured) some Raketas, a Poljot Alarm, an Omega Speedmaster Reduced and a vintage (1972) Tissot Seastar.  I like unloved vintage watches, with quirky faces and enjoy bringing them back to life through the simple(!) act of disassembly, clearing and reassembly. I am an Electrical Engineer who also undertook a trade apprenticeship so I am reasonably handy - It's fair to say, I know just enough to get myself in trouble. 
    • ha ha looks like a WMD.....you know I want one now  
    • Sorry to reopen a necro-thread (long dormant) - I have a Seiko Kinetic 5M42A that needs at least one coil, possibly both. Anyone know of any sources?  The usual fallback of eBay has failed me - there are people selling coils, but not the ones for this movement (which was apparently a very popular movement, used in Seiko and Pulsa branded watches.) The coil numbers are: 4002 516,  and 4002 519 I'd also love to find a source for spares of the screws used all over this movement - they're Seiko PN 0022 247 Thanks! (Moderator - if this should be a new thread, please do feel free to tell me, or drag this one into a new thread.) Don Eilenberger
    • Hi a read what you told me  but a still can't understand how to tell what way do you mean when you said the shape example?
×
×
  • Create New...