CASIO EDIFICE

[berniethebolt]

HI,I am not sure where i should post this question, if at all,but a friend of mine asked if i could clean up his Casio Edifice EF -101 and i duly obliged.it needed a new crystal.no problem.then it came to the bracelet.Casio no longer supply this model and the lugs are narrow (12mm) and the end pieces were some sort of plastic. i have hunted everywhere for replacements without any luck.any ideas how to fix this without too much expense? grateful for any suggestions (within reason)

[SteveT]

is the plastic part broken? perhaps if you know someone with a 3D printer they could make a replacement

 

[jdm]

As said above one possibility could be 3D printing but expect to pay at very least the cost of a new same watch. Maybe you can fix the end links with epoxy glue, sand excess material and paint. 

[berniethebolt]

13 hours ago, jdm said:

As said above one possibility could be 3D printing but expect to pay at very least the cost of a new same watch. Maybe you can fix the end links with epoxy glue, sand excess material and paint. 

i dont think its worth the bother.might try bits from other bracelets!