Jump to content

Recommended Posts

Posted

I have read through all my tech data on the 7750. This will be the 4th one I have purchased for parts and rebuilt. The chrono bridge here in this one is unfamiliar to me.....can snybody shed some light on where it comes from???6779ddbad85ee17d254629492a17dcbf.jpg

 

Sent from my SM-G950U using Tapatalk

 

 

Posted

It Might be one of those 7750 derivates used by Longines and others, could you take a picture closer to the balance, there it should say what model it is, might say something like A07.XXX?

Posted
It Might be one of those 7750 derivates used by Longines and others, could you take a picture closer to the balance, there it should say what model it is, might say something like A07.XXX?
A05H21

Sent from my SM-G950U using Tapatalk

  • Thanks 1
Posted (edited)
4 hours ago, bjd1020 said:

A05H21

Sent from my SM-G950U using Tapatalk
 

Its a variant of this:

Screen Shot 2019-05-13 at 11.54.06 PM.png

Edited by noirrac1j
  • Like 1
Posted
5 hours ago, bjd1020 said:

A05H21

I see noirrac1 found the data, this might have been in a Hamilton Khaki Field Chronograph.

It is a nice treat getting to see this beauty, thank you.
 

  • Like 1
Posted

The add on ebay had it listed as a vintage Omega. I had to replace the balance and rotor. I paid 60 bucks for it.

Sent from my SM-G950U using Tapatalk

Posted
14 hours ago, bjd1020 said:

The add on ebay had it listed as a vintage Omega. I had to replace the balance and rotor. I paid 60 bucks for it.

Sent from my SM-G950U using Tapatalk
 

That's an unbeatable price for a 7750 even with having to buy a balance and rotor. A brand new 7750 day/date is nearly $500 from J Borel.

J



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Would be worth starting here Del, if they don’t have it they might know someone  https://www.barometerworld.co.uk   Tom
    • What size hands do you need as most wholesalers have a selection. Agian most wholesalers have a selection of crystals depending on the shape. No would be the answer to UV glue as it doesn't work in a sandwich and only the overspill exposed to UV sets.
    • To start searching for hands, measure the diameter of the hour wheel where the hour hand attaches, and the tip of the cannon pinion where the minute hand attaches. Use calipers that are accurate to 0.01mm, and then you can look around ebay for hands about the right size. It is typical to have to either close down (concave punch) or broach open the pipe when fitting hands since you won't usually find a set that is the exact diameter of your hour wheel & cannon pinion. It is reasonable to work with something about +/- 0.03mm  Measure the thickness of the 4th wheel extended pivot for a seconds hand. Cousins does sell some new hands for pocket watches, but I don't find them suitable for old watches. They just don't look right so instead I managed to win an auction on an enormous assortment of old hands. It's sort of fun to pick through them and measure to find a workable pair. I use this tool to measure hands:
    • First thought was Ali but not quite the right size. https://www.aliexpress.com/item/4001332181418.html?src=google&pdp_npi=4%40dis!GBP!15.89!15.89!!!!!%40!10000015722336818!ppc!!!&src=google&albch=shopping&acnt=494-037-6276&isdl=y&slnk=&plac=&mtctp=&albbt=Google_7_shopping&aff_platform=google&aff_short_key=UneMJZVf&gclsrc=aw.ds&&albagn=888888&&ds_e_adid=&ds_e_matchtype=&ds_e_device=c&ds_e_network=x&ds_e_product_group_id=&ds_e_product_id=en4001332181418&ds_e_product_merchant_id=109329972&ds_e_product_country=GB&ds_e_product_language=en&ds_e_product_channel=online&ds_e_product_store_id=&ds_url_v=2&albcp=17859500389&albag=&isSmbAutoCall=false&needSmbHouyi=false&gad_source=1&gad_campaignid=17190468917&gbraid=0AAAAADznYb9wcm3yr5TVnjKS13BUaCYRa&gclid=Cj0KCQjwoZbBBhDCARIsAOqMEZX56VaN03sqlHk3bDswNOyXmi-lHQRBwgyt3mVympigQhcfH6Iqb94aAnEsEALw_wcB
    • I'm looking for hands (3) & a crystal (4cm dia.) for my watch Serial No. 85590 as shown in the photo. I'd be grateful for suggestions re potential sources; and to know if uv glue would be suitable for re-fixing the 12mm dia. seconds dial. 
×
×
  • Create New...