stem removal

[itsmehoray]

hi i was wondering how to get the stem out of this watch as part of the face has came off and i need to stick it back on i have circled the part that has came loose the watch is a rotary pacific swiss aquaspeed any help would be vreatly appreciated

[oldhippy]

We need to see the back of the case. The most common are screw on backs or with a bench knife, they prise off. If you could post a good clear photo that will help us. 

[itsmehoray]

8 hours ago, oldhippy said:

We need to see the back of the case. The most common are screw on backs or with a bench knife, they prise off. If you could post a good clear photo that will help us. 

its a screw of back

[TexasDon]

Oops. You may have taken OH a bit too literally. I think what is needed is a photo of the watch movement inside the case with the case back removed. A good clear photo will allow one of the knowledgeable members to inform you exactly how to remove the stem. 

[itsmehoray]

8 minutes ago, TexasDon said:

Oops. You may have taken OH a bit too literally. I think what is needed is a photo of the watch movement inside the case with the case back removed. A good clear photo will allow one of the knowledgeable members to inform you exactly how to remove the stem. 

oops ill stick 1 up later

[itsmehoray]

[itsmehoray]

On 2/23/2019 at 8:04 PM, itsmehoray said:

oops ill stick 1 up later

 

[itsmehoray]

On 2/23/2019 at 10:52 AM, oldhippy said:

We need to see the back of the case. The most common are screw on backs or with a bench knife, they prise off. If you could post a good clear photo that will help us. 

 

[watchweasol]

Hi    when you look down on the movt just to the right of the stem there is a small button press this down and remove stem.   two PDf's attached may be of some use to you.

Quartz Movement Book Feb 2014 (1).pdf

3929_isa 8172-220.pdf

[itsmehoray]

21 minutes ago, watchweasol said:

Hi    when you look down on the movt just to the right of the stem there is a small button press this down and remove stem.   two PDf's attached may be of some use to you.

Quartz Movement Book Feb 2014 (1).pdf

3929_isa 8172-220.pdf

any chance you could circle the button fir me

[TexasDon]

I have two different quartz watches that require the crown to be in the center position to see the release mechanism. Have you tried pulling the stem out to observe if a release mechanism pops out of the movement?

[itsmehoray]

got it thanks guys

[TexasDon]

Congratulations. Delighted to read that you prevailed. 

[watchweasol]

Hi Well done  perseverance wins through