Removing rotor from UT33

[Lc130]

Hi All

Can anyone please tell me whether the center screw or the 3 screws indicated need to be removed to get the rotor off.  There are ball bearings under the center screw.  I'm a beginner and I can see the ball bearings coming out and lost forever.

Thank you

Charlie

 

 

 

[rogart63]

The center screw to take the rotor of . The three screws you don't need to take of unless you are planning to replace the bearing. 

[Lc130]

29 minutes ago, rogart63 said:

The center screw to take the rotor of . The three screws you don't need to take of unless you are planning to replace the bearing. 

Many thanks!

[yankeedog]

Uh...unless you find a burning need to do that ,you can take the whole winder assembly off. Just remove the screws at its out perimeter...there are three.

[Lc130]

6 hours ago, yankeedog said:

Uh...unless you find a burning need to do that ,you can take the whole winder assembly off. Just remove the screws at its out perimeter...there are three.

Yes, I've done that.  

[yankeedog]

No point in fixing what isn't broken