Jump to content

Nantwich Cheshire

clockboy
 Share

Recommended Posts

clockboy Distinguished Member

clockboy

Posted
Posted

I recently visited Cheshire for a short break. One of the villages I visited was Nantwich where I found a museum (FREE) which had many working vintage clocks see why below + some of the long case clocks (all working) I recommend.

DSC_8100.thumb.jpg.df39080dd3cd283baa21c697f18cee3f.jpg

 

DSC_8102.jpg

DSC_8101.jpg

DSC_8099.jpg

oldhippy Distinguished Member

oldhippy

Posted
Posted

Unusual movement in that William Massey. Not keen on the poor detail of the painted dial. Late painted dials were poorly painted and so full.    

Thanks very much.

Pip WRT Addict

Pip

Posted
Posted
Unusual movement in that William Massey. Not keen on the poor detail of the painted dial. Late painted dials were poorly painted and so full.    
Thanks very much.

Beginners question here... why do they have more than one key hole on the dials? Is one for setting the minutes and one the hours? Or one the time and another the complication?


Sent from my iPad using Tapatalk
clockboy Distinguished Member

clockboy

Posted
  • Author
Posted

One for the strike and one for the clock going train. For Westminster's one for the hour strike, one for the 1/4's & one for the clock going train

 

  • Like 1
Pip WRT Addict

Pip

Posted
Posted
One for the strike and one for the clock going train. For Westminster's one for the hour strike, one for the 1/4's & one for the clock going train
 

Thanks. Makes more sense than my guess did!


Sent from my iPhone using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • AndyGSi
      Reusing mainsprings in an automatic and slipping

      By AndyGSi · Posted

      Does your parts list actually have the description as mine just shows the parts. Is 1520 the gear that sits in the auto bridge to couple to the barrel. You could try letting the power down and then remove the idler gear between the 2 barrels and see how it winds then. I presume you're doing all this at the moment without the auto bridge in place.
    • HectorLooi
      DIY Bronze tweezers

      By HectorLooi · Posted

      I love my brass tweezers and use them for 90% of my work. I like that brass is soft and does not scratch parts and it seems to grip parts better than stainless steel. And brass is also non-magnetic, which really helps when working on quartz movements. However, brass is a little too weak for jobs like pulling back yoke springs. So I thought of upgrading to bronze. But I can't seem to find curved bronze tweezers. And Cousins price for a pair of Bergeon straight bronze tweezers is around £45. A couple of months back I had the idea of swapping out the carbon fibre tips of my tweezers and putting in bronze tips. And that is what I did. I got a piece of 2.0mm bronze sheet from AliExpress and cut out 2 curved tips and replaced the carbon fibre tips. I'll probably thin down the tip further gradually to a point where it still has strength to draw back thick yoke springs. 
    • JohnL
      Reusing mainsprings in an automatic and slipping

      By JohnL · Posted

      Ah, well that's a relief, though the parts document does list a 1520 which is a coupling clutch. This threw me for a while (it's a quiet day in the office) until I realised I couldn't see a listing for the reverser wheels. So, we're back to the mainspring should slip in the barrel. It can really only be one of three things (that I'm aware of) mainspring 'coned' and pressing slightly on the lid the kink, close to the  end of the spring, which puts a sort of a self lock grip on the spring and may not allow the spring to release enough there to allow slipping quantity of lubrication, either not enough, or too little Two of those require new mainsprings, which aren't readily available, though I may post a query about alternative mainspring sizes. The third, will more grease or less be required? The word breaking in breaking grease suggests more means more breaking?
    • AndyGSi
      Reusing mainsprings in an automatic and slipping

      By AndyGSi · Posted

      The idler gear I'm referring too is the one between the 2 barrel wheels. These movements just rely on the spring slipping to prevent over winding.
    • EtherJunky
      Tip and tricks here.

      By EtherJunky · Posted

      Not sure how useful this might be, but a while back I bought some bamboo tweezers (multipack with a ridiculous amount of them in) and have been using them in place of pegwood. Seems to be working just fine
×
×
  • Create New...