Jump to content

See, You Leave The Door Open And Anyone Can Wander In!

FrankG
 Share

Recommended Posts

FrankG New Member

FrankG

Posted
Posted

Hello,

 

Just signed up after browsing around. I've been viewing Mark's videos and because of that, he's convinced me to have a go at stripping down and reassembling a watch.

 

Always been interested in old time pieces, though never owned many as I couldn't decide on which one to go for! But I've become re-invigorated with horology as my wife has bought me a rather nice J.W. Benson pocket watch for my up-coming 60th birthday. I wanted to find out more about what makes it tick, so to speak.

 

So I've since bought a couple of beginner books and a modest set of basic tools and have purchased a handfull of pocket watch movements (no cases) off ebay - some are just 'scrappers' for me to cut my teeth on and some are 'workers'. I plan to dissasemble each of them, practice cleaning and then reassemble. I hope that the 'workers' don't turn into 'scrappers' in the process!

 

I've also bought a nice looking hallmarked silver pocket watch, which was advertised as working but had a slight problem with the click. The test will be to see if I can clean and repair this one and then sell it on.

 

So that's my winter nights sorted out!

 

I'm an accountant by trade, but have always worked in industry. I enjoy tinkering around and have a small lathe and mill in my workshop (that's the garden shed to everyone else). I've taught myself how to use the lathe and mill, have mastered silver soldering and basic welding and after making a few knives, have had a go at back yard heat treating and tempering. I think I must be a frustrated Engineer!

 

I will be retiring soon and I'm looking for an interesting hobby that will keep me out of the way of the Boss, and I think that horology will be what I'm looking for.

 

Well, that's the end of my rambling. See you around and I'll try not to ask too many Noobie questions.

 

Take care.

 

 

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

What a cracking introduction to the forum Frank, and a very warm welcome from Scotland. Like you my horological interests kicked in when I turned sixty. I have been working at it now for three years and just love the subject. I had to laugh when you described yourself as a "frustrated Engineer", in my case I'm an "Engineer that is frustrated" !

I look forward to your contributions to the forum in the future. Any chance of posting some pictures of your Benson pocket watch?

Link to comment
Share on other sites
FrankG New Member

FrankG

Posted
  • Author
Posted

Any chance of posting some pictures of your Benson pocket watch?

 

Thank you both for the kind welcome.

I'm having to wait till January before I can get my hands on the watch, but I'll try and get some pictures uploaded of the other bits and pieces.

Pictures are much more interesting than my waffle!

Link to comment
Share on other sites
Don Super WRT Addict

Don

Posted
Posted

Hi Frank and welcome. I am new to the hobby myself. Please ask as many noob questions as you like. There are lots of nice, knowledgeable members here to answer your questions and we'll all learn something.

 

Don

Link to comment
Share on other sites
Vich Distinguished Member

Vich

Posted
Posted

Hello Frank and welcome.

There are quite a few like minded folk here and a helping hand will always be extended if you post a problem that you come across with watch repairs etc.

There are a great mix of experts and amateur horologists and tinkering hobbyists like me. But be warned it is addictive, I bought three watches last week and am waiting for them to arrive every morning post.

Cheers,

Vic

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Questions about my Bravingtons Renown Mantel Clock

      By Neverenoughwatches · Posted

      Hmmm you know when i said some damp might have caused the bubble originally hmmm 🤨
    • Neverenoughwatches
      404 Club Reboot

      By Neverenoughwatches · Posted

      Are you all jerking my chain, I'm a yorkshireman £4.04 is too much 😆
    • Kkramme
      Blew it with a coil

      By Kkramme · Posted

      [Myota2034] Custom simple quartz watch — PricewaterhouseCoopers On a very very different note, here is a watch from approximately 2000 when I was a Partner with PwC, Management Consulting. It was a simple “marketing watch” with a clever “vase of knowledge” that is subtly revealed on the dial as the second hand progresses. Clever for a simple watch!⌚️
    • Neverenoughwatches
      Mainspring winder question.

      By Neverenoughwatches · Posted

      I think someone else has though. Some where here using a modified perspex sheet. I may be wrong i may be right , i think it involved fitting the arbor to a pin vice. I dont have experience of the bergeon winders, are the handles not interchangeable ?
    • Neverenoughwatches
      Dial Dots

      By Neverenoughwatches · Posted

      Never tried dial dots, i always considered them as a bit of a bodge.  You are adding something that was never intended to be there. I wonder how the adhesive reacts to any part of the movement, hot summer heat and i think things might turn sticky. Most adhesive backed stuff has a tendency to soften and slide around so it may spread, i have used a lot of so called sticks all adhesives in my industry that are just not up to the job. I suppose they get you out of a problem quickly, but how permanently might that be ? I would just explain to the owner that it may or may not work. WWs other ideas are a much more permanent solution but both have their risks . I've tried milling and dial feet replacements, hmm it was ok, ive heard of folk dimpling the face , so that needs care . And i have soldered a few times , all with good results but i am very careful and I practiced it a lot.
×
×
  • Create New...