Jump to content

Balance assembly refitting tutorial?

carlos123

By carlos123
in Watch Repairs Help & Advice

 Share

Recommended Posts

carlos123 Watch Enthusiast

carlos123

Posted
Posted

I'm new to watch repairing and have been playing with some expendable ebay purchases, including a BFG866 movement. I've had a go at servicing and all went pretty well and burst into life as soon as I had refitted the balance assembly. Unfortunately though, after 12 hours or so, that watch gained about 5 minutes :(

I think I worked out the problem, the balance spring had overlapped thus increasing tension? Anyway, I removed the balance cock in order to realign the spring but no joy as yet. I have gone through about 3 springs with two which are beyond repair and one that should be salvageable?? 

Is there any information or tutorials covering this as well as covering all the alignment stuff? 

I'm also assuming that the BFG866 is a relatively cheap watch (single jewel) and not really designed for beginners tinkering?

Thanks in advance

Carl 

Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
Posted
I'm new to watch repairing and have been playing with some expendable ebay purchases, including a BFG866 movement. I've had a go at servicing and all went pretty well and burst into life as soon as I had refitted the balance assembly. Unfortunately though, after 12 hours or so, that watch gained about 5 minutes [emoji20]
I think I worked out the problem, the balance spring had overlapped thus increasing tension? Anyway, I removed the balance cock in order to realign the spring but no joy as yet. I have gone through about 3 springs with two which are beyond repair and one that should be salvageable?? 
Is there any information or tutorials covering this as well as covering all the alignment stuff? 
I'm also assuming that the BFG866 is a relatively cheap watch (single jewel) and not really designed for beginners tinkering?
Thanks in advance
Carl 

Practical watch repair.


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites
Pip WRT Addict

Pip

Posted
Posted
Is that a book?


Sent from my iPhone using Tapatalk

Yes, it’s pretty much the standard book always recommended to starters in tinkering. Practical Watch Repair by Donald DeCarle I think it is. SO much information inside, which is why it’s THE go to book.


Sent from my iPad using Tapatalk
Link to comment
Share on other sites
carlos123 Watch Enthusiast

carlos123

Posted
  • Author
Posted
Just now, Pip said:


Yes, it’s pretty much the standard book always recommended to starters in tinkering. Practical Watch Repair by Donald DeCarle I think it is. SO much information inside, which is why it’s THE go to book.


Sent from my iPad using Tapatalk

Thanks, I shall have a look, I have an Epub copy of "maintaining and repairing mechanical watches" but it doesn't cover this level of detail

  • Like 1
Link to comment
Share on other sites
Pip WRT Addict

Pip

Posted
Posted
I don’t suppose there is a free electronic copy available to download, or is it a physical copy only?

Cheers

Carl


Sent from my iPhone using Tapatalk

Physical copy. It’s not much though, about £10 or so iirc? Well worth it.


Sent from my iPhone using Tapatalk
  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • JeremyLaurenson
      Breitling Navi Heritage (ETA 2892A2) seconds subdial skimpiness...

      By JeremyLaurenson · Posted

      I thought this may be "right" forum to post this. After 7 months out in Switzerland I got my Navitimer back from Breitling. I had sent it off since its 20 years old to have a complete overhaul done... Nothing major wrong, but I did notice this seconds sundial skipping thingy.... $1300 later and 7 months later, I notice the 'skips' are still here unless the chronometer is engaged. I would think this is likely the hand binding up and maybe clearance with the dial, but at any rate Im interested as to whether this is something I should be returning the watch to Breitling for and insisting on being fixed. See below - 1 minute or so of regular running and then 1 minute with the chronograph engaged.  
    • WatchesFarm
      How to recognize radioactive watches.

      By WatchesFarm · Posted

      Hello everyone, I recently received a request for advice on purchasing a vintage watch, a Waltham A-11 ORD. DEPT. I asked if they were aware that these types of watches have radioactive hands and dials... but they had no idea what I was talking about. So, I thought of creating a video that could help recognize them, starting from the distinctive details to using a Geiger counter. I hope you like it and find it useful for those venturing into the world of vintage watches. Bye.     
    • Levine98
      Chinese clone demagnetizers

      By Levine98 · Posted

      I’ve tried everything using both my blue and donut demag units.  I’ve even tried beating them with a steel hammer 🙂   im now trying heating them over gas flame — if that doesn’t work …..
    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      The 110v supply could be problem with the blue one. Have you tried moving the piece to demag through different orientations manually as its drawn away ? As Nev quoted the magnetic fields of the demag have to overcome those of the steel. 
    • Razz
      Elgin Excelle 17j auto

      By Razz · Posted

      Thank you Marc! I re ran the TG. First I went ahead and checked the balance jewel on the regulator and it was bone dry. I cleaned and oiled it, not without some drama including pinging the capstone and searching my bench with a black light for 30 minutes and finally shone it on my face and looked in the mirror only to find it on my left cheek in my 2 day growth! Back in and on the Grapher we are at 275. However significant drop in DD (234) and CR (190 edited) positions tells me it's time for a complete cleaning and oiling.
×
×
  • Create New...