Jump to content

Seiko Kinetic 5M42-OE39


Recommended Posts

I have a Seiko Kinetic 5M42-0E39 purchased in the mid 90's, wore it everyday, had it serviced in the early 2000's by the Sekio service center(new capacitor, band & crystal) in Mahwa NJ. When I received it back the max charge was onlt 20 sec no matter how long I wore it. After a few years the charge wouldn't last through the night so I stopped wearing it. I really like the watch and would like to get it refurbushed, My question is where?

I've contacted a few places I've found on-line but have not received any reply's from them (probably old websites). Local jewlers don't seem to want to do it (I'm in the Indianapolis area). And I'm not thrilled to sent it back to Seiko in NJ.

So looking for some suggestions and/or advise.

Charlie

Link to comment
Share on other sites

Yes I have and watched the videos on how to replace the capacitor. Doing that with the tools and skills I have would be a stretch. However I have a feeling it would need more, like a good cleaning and lube. Plus if it needs any further repair, like a rotor, that would be beyond what I would want to attempt.

Link to comment
Share on other sites

Well at least you are honest about it.And if you have never attempted this kind of thing before you are wise not to touch it. I live in Eastern North Carolina.The only guy I know of that might do such work has a store in the Mac Arthur mall in Norfolk. A few years ago he replaced a crystal for me and quoted me a price  to clean and lubricate a mechanical Elgin watch I had.his price was a bit steep and was the primary motivation for me to learn how to do it myself.I suppose you could look him up.an older Japanese man..I don't recall the name of the place and I can't tell you how good the work is.but it might be a place to start.

Link to comment
Share on other sites

I've read you've already searched online for a repair service but with no luck on response so maybe revisit this option since, if you don't want to do the work yourself, you'll need to find a specialist. This isn't general watch repair work and is a little specialist so I'm not surprised that your local jewelers have declined. A quick search online, for instance, brings up http://www.kineticrepair.com/ who specialise in Seiko kinetic watch repairs in the US. This does seem a current service (you mention 'old websites') since they're advertising 20% off until 9th October. I know nothing about this service and have no affiliation with it so do your own research but it does look genuine and professional.

Link to comment
Share on other sites

one of the alternatives to servicing is movement swap?

http://www.startimesupply.com/merchant2/merchant.mvc?Screen=PROD&Product_Code=S5M42&Store_Code=1

2 hours ago, WatchMaker said:

I find the website rather strange to navigate but if you take the time you can get the server so page. Then scrolling down the page you actually shows what he does for the upper in servicing..  Then if you pay attention to all the equipment  looks like he has the right equipment to do the job. Plus he seems to grasp what needs to be done replacing the capacitor/lithium battery  isn't always going to fix the problem if the watch needs to be serviced..

http://www.kineticrepair.com/Kinetic_Service_Levels.html

 

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I will try this weekend.  I've tried several times with my cell phone and it's just too small and recessed to get a good picture.  I need to get my macro lens and tripod out and then figure out how to get enough light down the hole in the side of the man plate to  actually show the top of the broken screw. I appreciate the effort and will try and get that pic this weekend.
    • Hello and welcome from Leeds, England. 
    • Hi,   My name is Simeon I am based in Sydney, Australia and have recently got into watch repair / watch making.  I am very much a learner having serviced multiple forgotten watches, some of which were actually successful!   I have a slowly growing collection of watches, mainly old Soviet, a few Japanese and (not pictured) some Raketas, a Poljot Alarm, an Omega Speedmaster Reduced and a vintage (1972) Tissot Seastar.  I like unloved vintage watches, with quirky faces and enjoy bringing them back to life through the simple(!) act of disassembly, clearing and reassembly. I am an Electrical Engineer who also undertook a trade apprenticeship so I am reasonably handy - It's fair to say, I know just enough to get myself in trouble. 
    • ha ha looks like a WMD.....you know I want one now  
    • I took a chance on a non running Cosmotron X8 ("perhaps just needs a new battery" said the advert). Sure enough, I open it up and it has the wrong battery installed (a Renata 344 rather than the correct Renata 386) and the screws holding the battery contact had been sheared off to half a head on both ends. Ho ho, I thought - there's the problem. I got the broken screws out easily enough and as soon as I placed the correct battery in place the balance started. This picked up speed when I reinstalled one side of the battery contact and looked like it was a runner. As I was trying to get the replacement screws in, I did one side but the second was a bit of struggle (hold down the battery contact against its spring while dropping the screw in with tweezers) the balance stopped again. This time it wouldn't start again. 98 percent sure that I didn't stick anything, anywhere important or break it in a mechanical way. The battery was in place for most of the struggling with the contact, so it might have had an intermittent connection which could have upset the electronics. I tried giving it a puff with the blower but the balance doesn't seem to rotate in the normal way, it seems to be held in a static position by magnet. It can be pulled out of this position but spins back and stops dead. This may well be correct for all I know. Anyway, does anyone know anything about these watches and can tell me how I would go about and fault find this? I will be servicing it at some point so should be able to rule out mechanical issues from an old watch but not sure where to start with the electrical part of it.
×
×
  • Create New...