Eterna shock springs

[rogart63]

Anyone worked on a Eterna with T shock springs.  For some strange reason Eterna use all sorts of different shocksprings. There are U and T . We can't figure out how to remove the T springs. 

http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&2&2uswk&Eterna_1246_0

Movement everything but clean  

Edited May 2, 2018 by rogart63

[jdm]

7 minutes ago, rogart63 said:

Anyone worked on a Eterna with T shock springs.  For some strange reason Eterna use all sorts of different

No experience but looks like there is a small plate held by a screw.

[rogart63]

20 minutes ago, jdm said:

No experience but looks like there is a small plate held by a screw.

Nope. That is to remove the complete shock block . We found an other picture on the net if that could help. 

[rogart63]

It works like this . Figured out. Push the spring to the cutout side and it will release . Used a needle this time but should be fine with a sharp pair of tweezers also. Middle picture it's open but it's hard to see. Zoom in by clicking the picture. 

[rogart63]

Better picture of the spring.

 

Edited May 3, 2018 by rogart63