Omega 'bumper' second hand

[Yorkie]

Hi, 

I am trying to source an omega second hand, for a 351 calibre, 2635-1 case, the current one is very rusty.

i have measured the existing and think i need a 0.18mm dia, SS,  11.0mm centre pin to end and approx 13.6mm end to end.

i am struggling to find Cousins equivalent, and my nearest internet search throws up a silver 11.3mm to tip but 15mm total length...

Ofrei offer a 0.18mm 13mm genuine omega silver sweep, but not for the 531 calibre, and it does not say total length.

 

Your help appreciated  thank you

 

[StuartBaker104]

I assume this is one of the models where the sconds track runs inside the hour markers?

I spent some time searching for a similar hand set for an Omega 420 Seamaster and concluded that the style I needed just aren’t out there to be had so I polished up the old ones. For the second hand you could get a similar but longer Omega or generic hand and cut it down. The tail on the Omega hands  has quite a distinctive shape though.

[Yorkie]

Hi stuartbaker104

Many thanks for the helpful reply, looks like i will be cleaning the old one up !