Jump to content

My watch collection


Winston

Recommended Posts

Hello!

Here is my watch collection :) I know it's nothing amazing for some of you but being a full-time 21 years old student I worked quite hard to have theses :P. Horology is really an amazing hobby and I can not wait to learn more!

From left to right:

-Festa pocket watch from the 50" I think. I got for 20$ from a watch market. The watch runs but my goal is to service it myself soon

-Casio F-91w the legend :P , it is my beater watch for when I work outside or on my car.

-Orient Bambino gen 2 version 2. An entry level automatic dress watch with a hacking and hand-winding movement and date complication on a leather strap.

-Orient Ray II an entry level dive watch with a hacking and hand-winding movement and day-date complication.

-Casio EF-527D-1AVEF, quartz chronograph with date complication.

20171103_034657.thumb.jpg.3bb2f21d133aa8e91c95d8528a4a647c.jpg

  • Like 4
Link to comment
Share on other sites

I'm not a big collector myself but have a few watches that I like and they are not necessarily expensive, I think collecting anything is the individual sentimental value first (for me at least) and for some, it's what's going in the market in term of history of the particular collection (it could be anything and not only collecting watches), but somehow after the few sentimental items people start with the more valuable items which are by default cost much more money, so I think collection is mixed of some watches (in our case) emotional value and other items with monetary value. I like the Bambino and in my experience with Casios, which I had two in the past. They have served me well (I've bought them new at the time) but the cases ended up falling apart because of cheap material I guess and the plastic just dried and fell apart like breadcrumbs. Also, it is possible that through the years you may sell some of your current collection and acquire other watches as your taste and knowledge develop. As for now enjoy it and don't feel bad about it.:)

Link to comment
Share on other sites

Thanks for sharing!!!

I place much more value on what I think of the watch vs what it actually is worth. If it looks nice, has a decent movement, runs well and fits my wrist properly so I can wear it, it's a collectible :)

Sure you could spend many many thousands on a watch, but if it ends up in a drawer or in a safe and never runs, and is never worn, what's the point.

Obviously, if you can afford it, I'm sure it's nice to have an expensive good looking watch on your wrist

Link to comment
Share on other sites

Collecting anything is a very personal thing, and those of us who collect watches usually have particular slants on the subject.

You can see my collection (well, most of it) at:

www.willswatchpages.com (site currently and slowly being edited)

I like pre1970, handwound styles on the whole, and some of the lesser-known and therefore overlooked, makes often have excellent movements. Many of them I picked up for a snip on eBay at the time.

As far as pocket watches are concerned, I favour American, railroad-grade makes like Hamilton, Waltham, etc.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Welcome to the forum, enjoy. I have a varimatic that went  out of sequence because it’s hydronic oil ran very low. Must admit it’s still in my garage just know time to fix it. Purchased a cheap Indian Junta/ sonic Pearl as a stop gap a few years ago and it still performs perfectly so no incentive to fix the Varimatic. 
    • The plate is OK, thanks. It seems the answer to my question is that this is a 'hack' & for me another reminder that in general, one won't be the first person to be tinkering with an old timepiece!. As you day, I've been fortunate to have gotten some good advice and, just as important, encouragement. I've been lucky then not to have the balance spring break as a result of my novice 'ministrations' - but I did remember to 'stroke' rather than bend per se. The clock is of sentimental value to the owner so I'm relieved to have now got it running to time with the support & encourage of forum members like yourself.
    • Recently purchased a L&R Varimatic knowing that the piston does not fully rise in the cylinder. The likely cause is air in the system. The manual calls for using a bleeder cup, which is as rare as hen's teeth.Does anyone have any experience with this issue and if so, how did they resolve it?
    • Thanks ww, its maybe not as much of a bodge trick that i thought it was. 
    • Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement.  It would be nice if you told us a little about yourself.
×
×
  • Create New...