Jump to content

Mido Commander - Cal. 2834-2 - 28,000 A/hr Automatic


WillFly

Recommended Posts

Mido have been a major watch manufacturer since 1918 and have produced a number of innovative designs and numerous chronometer models. The "Commander" was first introduced in 1959 - I believe this one from my collection is around 1970 - and had a unique monocoque design. You can only get at the movement by taking off the bezel/crystal and front unloading from the otherwise watertight case.

 

The dial has a Rolex-like day window and date window, and the automatic movement beats at 28,000 A/Hr. I love it.

 

post-64-0-27895000-1405934379_thumb.jpg

post-64-0-79799600-1405934390_thumb.jpg

Link to comment
Share on other sites

Tidy watch Will.

I think you should post a picture of the movement though! ;-)

Mmm... I'm not going to fiddle with the case on this one just yet! (You tempter). But here's a picture of the movement from another watch:

post-64-0-44283300-1405944550.jpg

Link to comment
Share on other sites

You must have piped me at the post on that one Will!! ;) ...The strap is aftermarket and fits not too bad...I have a few Mido's which you take out via the front and can be a bit tricky sometimes. Would look great on a leather strap. If its running fine I'd leave well alone.

I'm sure I read a post about giving each other the heads up on ebay??

Link to comment
Share on other sites

The seller threw in a leather strap for free after I'd got the watch - very nice chap to deal with. So far, it's keeping excellent time - and it has a second hand hack, which makes it good for really accurate time.

 

Bought it on a whim just before the auction ended. Sorry you got pipped, Ash...

Link to comment
Share on other sites

You must have piped me at the post on that one Will!! ;) ...  I'm sure I read a post about giving each other the heads up on ebay??

Ash, you might be interested to read how I collect watches using eBay, just to demonstrate the complexity of my use of eBay... I'm a very serious collector of watches - within the parameters of my watch interests.

 

1. I actually scan through eBay almost every day, and sometimes twice a day.

2. I scan for auctions finishing in a couple of days, and no further.

3. Anything which catches my eye and meets my criteria, I add to my "watch list" - so...

4. My watch list might have anything from no items to over a couple of dozen items in it at any one time.

5. I do a fair amount of research into the items on my  watch list.

6. As the auction end-time gets closer for each item, I look at the bidding, check my budget, and decide whether I want to snipe it or not.

7. If an item gets chosen and is earmarked for sniping - i.e. I really want it and can afford it - I calculate a snipe amount which, I hope, will ensure a win - and then enter the snipe.

8. Nine out of ten times, my snipe wins the auction.

 

Given that that's my strategy, I'd find a mutual heads-up on eBay would flood the Forum with my activity! As you can see, I take it very seriously indeed.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I too got lucky with a JKA Feintaster for a bit under £200, they seem to go for around £400 which I find silly as a brand new one from cousinsuk is less money.   Tom
    • It looks similar to some AS movements, but it's not identical to any I can find. There may be a logo / number under the balance wheel??  
    • Many would disagree: https://www.rohm.com/products/faq-search/faqId/234 https://uk.farnell.com/c/semiconductors-discretes/transistors/bipolar-transistors/pre-biased-digital-bipolar-transistors https://uk.rs-online.com/web/p/bipolar-transistors/8232832P?gb=s https://uk.rs-online.com/web/p/bipolar-transistors/0580240?gb=s (RS don't have a specific category, but over 1000 "digital transistor" items).  
    • Thanks, ManSkirtBrew.  I started looking for a setup like yours and ran across this.  It was about half the price of the JKA Feintaster (depending on what auction you were in), and it's a Bergeon.  I bought it because I thought the price was fair (eBay - Buy it now), and I'm a sucker for vintage tools. It also has a table, so it should be easy to use for measuring jewels. I wonder if the the contact points can be changed out. Bergeon seems to manufacture new tables and accessories for the contemporary dial version. What do you guys think of it? I'm sorry this post seems to have taken a detour. I'm new here so let me know if I should start a new topic.
    • This is a flying cutter, usual one. The cutter itself is shown in the pictures in the first message, it is made of broken tungsten carbide drill bit. I asure that all the angles of the cutter are as they should be. I have video - little older one - that I made when onse making the same kind of winding pinion for a Poljot 2200, which is even smaller than this one. It is not easy to see in the video, but the tool rest moves about 1mm towards the object in Y direction and then returns back untill cutter is rotating. Then the spindle is rotated one tooth ahead and everything repeated untill all teeth are cut.
×
×
  • Create New...