Jump to content

Chaton Help

Folkvisor

By Folkvisor
in Watch Repairs Help & Advice

 Share

Recommended Posts

Folkvisor Super WRT Addict

Folkvisor

Posted
Posted

I have been working with 2 watches with chatons that hold jewels. I am not sure how to deal with them.

Even so, I have loosened a couple of the 1 screw chaton screws to move over the spring and remove the jewel for cleaning. 

I'm reticent to remove the screws entirely.

Any ideas?

Dave

Link to comment
Share on other sites
Folkvisor Super WRT Addict

Folkvisor

Posted
  • Author
Posted

It's a very small wrist watch movement. I'm going to get the movement back from the customer next week some time; I need to take a photo of it for the people at ETA as well.

Thank you for your interest. I will post a photo as soon as I can.

Dave

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Omega cal. 565 - low amplitude

      By RichardHarris123 · Posted

      @JohnR725 has pointed out many times that the Swiss don't care about amplitude, the timekeeping is the most important.  Give yourself a  pat on the back, great beat error and timekeeping, nothing to be disappointed about. 
    • RichardHarris123
      Without Our Forum

      By RichardHarris123 · Posted

      I'm bothered but I agree he's a busy man and I don't want to bother him.  In the meantime, we really do need to have other ways of contacting each other  
    • RichardHarris123
      Second hand watch market.

      By RichardHarris123 · Posted

      This is as complicated as epilame, too many unknowns. The life expectancy in the UK is circa 80, so most people from 1944 or earlier are dead.  Assume they had children at circa 20, they died in 2004. Their children started selling 1944 watches in 2004, so pre-1944 watches must be getting more rare.   It doesn't work though because as you stated some were sold as tat, but since watch prices have increased people have decided to sell when they may not of done in the past. 
    • Michael20
      Questions about my Bravingtons Renown Mantel Clock

      By Michael20 · Posted

      I was wondering whether anyone could assist with some questions I have about my latest acquisition, which is a two train ‘Bravingtons Renown’ mantel clock - Pics attached I have done some reading about Bravingtons and believe they sourced movements from various suppliers, so I wondered whether anyone recognises this one. I have stripped and cleaned the movement and the clock is now running well, but there are a couple of dodgy brass springs that I would like to replace. I haven’t found anything suitable searching the internet so I wondered does anyone know of a supplier that might help. Last question is about the veneer on the case, it is generally in reasonable condition but there are a couple of patches on the top where the veneer has lifted. So far, I have tried to reactivate the existing adhesive by heating from below and above with a hair drier, then clamping for a day or two. It has improved slightly but the bulge is still visible. I’d be grateful for any advice if anyone has dealt with this sort of repair before.
    • watchweasol
      Insert the movement inside the case

      By watchweasol · Posted

      Hi some pictures o& the movement and case would be appreciated so we can ascertain what the problem is you are having in fitting the movement.   Thank you.
×
×
  • Create New...