Jump to content

Cheap Lorus Chrono Case Back Problem

ro63rto
 Share

Recommended Posts

ro63rto Distinguished Member

ro63rto

Posted
Posted

After being asked for £15 to change the £1.99 battery, I decided to do it myself.

Big mistake. The snap back came off easy enough but I cannot get it back on. Too hard for finger pressure.

Any idea on what the best home method is?

Thanks.

IMG_20140704_130942.jpg

IMG_20140704_131055.jpg

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

You will have to use a press fitted with a die that matches the profile of your watch, Lee had a great solution to make a custom die for glass insertion, the same process could be used to make a die to allow the back on your watch to be pressed on safely.

Whatever you do, be careful not exert pressure on the crystal, only press on the case.

Here's a link to Lees solution:- http://www.watchrepairtalk.com/topic/460-curved-glass-easy-home-made-press/

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      AS 554 from 1930

      By Neverenoughwatches · Posted

      You're right Rich, throwing money at something that is practically worthless. I've had i happen a few times, its  disappointing, but a lesson learned in checking everything out before you put in too much effort. I'm still tempted to look through a load of balances and wheels i have to see whats doable with the genuine staffs, I'm thinking the  wheel that it came with is not genuine, it's had it weight completely hacked down. 
    • Neverenoughwatches
      Pcket watch "Art déco"?

      By Neverenoughwatches · Posted

      Ok thanks  it was just the brass cover next to the previous 3 keyless parts. Normally i wouldn't have expected that to be used to identify,  but I've searched American,  German and French part catalogs and coming up with nothing for the set lever,set spring and  yoke. I will have another look later today. There is another way but you would have to measure the stem very accurately. 
    • BlueHarp
      Pcket watch "Art déco"?

      By BlueHarp · Posted

      The diameter of the dial side is 40mm, and the other side 36,5mm. Here is another picture
    • Neverenoughwatches
      Pcket watch "Art déco"?

      By Neverenoughwatches · Posted

      The chronometer on the dial might just be a brand name, looking back yes i was mislead by the mention of Remontoir inside the case. Still not sure why it says Ancre Remontoir which translates to anchor winder, i imagine that means lever winder which still suggests to me 2 winding springs. I'm sure i have that same watch with chronometer on the dial ,I've never ventured inside it. My missus looks after 90% of my watches , so i will get hold of that one and have a look inside. Haha no not a remontoire, looks very basic.  Good to see the keyless works, can you measure the plate size to cut down on the search for them. Can you lay out that brass bridge cover as well please next to the other 3 pieces.
    • BlueHarp
      Pcket watch "Art déco"?

      By BlueHarp · Posted

      That's true. It is not a chronometer. As a matter of fact, I got it with another timepiece which is e real one, and only that (not a watch). I add a few pictures of my Chronometer / watch. no indication of a brand ...
×
×
  • Create New...