Flat Gaskets vs. Round Gaskets
-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
-
Posts
-
The plate is OK, thanks. It seems the answer to my question is that this is a 'hack' & for me another reminder that in general, one won't be the first person to be tinkering with an old timepiece!. As you day, I've been fortunate to have gotten some good advice and, just as important, encouragement. I've been lucky then not to have the balance spring break as a result of my novice 'ministrations' - but I did remember to 'stroke' rather than bend per se. The clock is of sentimental value to the owner so I'm relieved to have now got it running to time with the support & encourage of forum members like yourself. -
By Neverenoughwatches · Posted
Thanks ww, its maybe not as much of a bodge trick that i thought it was. -
-
-
By watchweasol · Posted
In think you are effectively shortening the coil by shorting out damaged tracks. In my case as long as the continuity was good and the resistance not too greatly affected it should be ok . One was on an era movement,
-
Recommended Posts