Jump to content

Russian stopwatch

szbalogh

By szbalogh
in Watch Repairs Help & Advice

 Share

Recommended Posts

szbalogh Super WRT Addict

szbalogh

Posted
Posted

I got from a friend two russian stopwatch movements, both with broken balances. Moreower, i had one also which was half the parts missing but it has a case. So from the three i could make one working piece. Making new pivots should be an easy task now :)

But i cant find any service walktrhrough for russian stopwatches. Can you help me with that? 

2016-09-15_15.20.54.jpeg

Link to comment
Share on other sites
clockboy Distinguished Member

clockboy

Posted
Posted

It is highly unlikely you will find a walkthrough with this watch. You will have to take lots of pics as to dis-assemble the watch for reference when re-assembling. To state the obvious before dis-assemble let the power off the mainspring. There are many vids & tutorials on the net on fitting balance staffs & lubrication etc.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • JeremyLaurenson
      Breitling Navi Heritage (ETA 2892A2) seconds subdial skimpiness...

      By JeremyLaurenson · Posted

      I thought this may be "right" forum to post this. After 7 months out in Switzerland I got my Navitimer back from Breitling. I had sent it off since its 20 years old to have a complete overhaul done... Nothing major wrong, but I did notice this seconds sundial skipping thingy.... $1300 later and 7 months later, I notice the 'skips' are still here unless the chronometer is engaged. I would think this is likely the hand binding up and maybe clearance with the dial, but at any rate Im interested as to whether this is something I should be returning the watch to Breitling for and insisting on being fixed. See below - 1 minute or so of regular running and then 1 minute with the chronograph engaged.  
    • WatchesFarm
      How to recognize radioactive watches.

      By WatchesFarm · Posted

      Hello everyone, I recently received a request for advice on purchasing a vintage watch, a Waltham A-11 ORD. DEPT. I asked if they were aware that these types of watches have radioactive hands and dials... but they had no idea what I was talking about. So, I thought of creating a video that could help recognize them, starting from the distinctive details to using a Geiger counter. I hope you like it and find it useful for those venturing into the world of vintage watches. Bye.     
    • Levine98
      Chinese clone demagnetizers

      By Levine98 · Posted

      I’ve tried everything using both my blue and donut demag units.  I’ve even tried beating them with a steel hammer 🙂   im now trying heating them over gas flame — if that doesn’t work …..
    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      The 110v supply could be problem with the blue one. Have you tried moving the piece to demag through different orientations manually as its drawn away ? As Nev quoted the magnetic fields of the demag have to overcome those of the steel. 
    • Razz
      Elgin Excelle 17j auto

      By Razz · Posted

      Thank you Marc! I re ran the TG. First I went ahead and checked the balance jewel on the regulator and it was bone dry. I cleaned and oiled it, not without some drama including pinging the capstone and searching my bench with a black light for 30 minutes and finally shone it on my face and looked in the mirror only to find it on my left cheek in my 2 day growth! Back in and on the Grapher we are at 275. However significant drop in DD (234) and CR (190 edited) positions tells me it's time for a complete cleaning and oiling.
×
×
  • Create New...