Jump to content

Rotary Day Date Setting

doggone1
 Share

Recommended Posts

doggone1 New Member

doggone1

Posted
Posted

Hi I have my Grandads Rotary automatic 21 jewel watch he was given in 1974 for for a lifetime of service it is solid gold and keeps good time day date work ok but i cant set them.

The crown appears to be out slightly and doesnt wind the watch when i pull it out further it adjusts the time ok but wont push in fully when i took the movement out of the case i could wind the watch but it is very tight

Link to comment
Share on other sites
Cad101 Super WRT Addict

Cad101

Posted
Posted

Looks like a AS1906,1916 or 2066 to me the setting is a keyless side problem  and it sounds like it needs a service if the winding is stiff don't wind it by hand any more you'll start to shear teeth if its stiff . Get it serviced.

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • luiazazrambo
      WWW Eterna sucked me in.

      By luiazazrambo · Posted

      Bulova Accutron 2181 - had an open coil I managed to bring it back into life. Longines 9L - not serviced just pics   Eterna-Matic Centenaire "61" - 1438U - not serviced just pics. Longines Cal 431 - not serviced just pics Lemania Cal 4650 - not serviced, just pics.
    • watchweasol
      Citizen Technical Info

      By watchweasol · Posted

      attached is the tech /parts sheet. .   Can one ask how come it’s full of water. After being told that the waterproofing was not guaranteed.  Problem being electronics don’t mix especially withe the power source being attached.  You may be lucky but I should look out for a replacement movement or working donor to rob the movement from. C720.pdf
    • JeremyLaurenson
      Breitling Navi Heritage (ETA 2892A2) seconds subdial skippiness...

      By JeremyLaurenson · Posted

      I thought this may be "right" forum to post this. After 7 months out in Switzerland I got my Navitimer back from Breitling. I had sent it off since its 20 years old to have a complete overhaul done... Nothing major wrong, but I did notice this seconds sundial skipping thingy.... $1300 later and 7 months later, I notice the 'skips' are still here unless the chronometer is engaged. I would think this is likely the hand binding up and maybe clearance with the dial, but at any rate Im interested as to whether this is something I should be returning the watch to Breitling for and insisting on being fixed. See below - 1 minute or so of regular running and then 1 minute with the chronograph engaged.  
    • Giogrlj
      Unknown mechanism

      By Giogrlj · Posted

      A friend of mine just gave me an old pocket watch. The case is in very bad condition but the movement itself seems to be in a quite good shape. I can't identify which movement is this, since I have to find a missing winding stem. I attach few photos in a case somebody would be able to give some hints.  Thank's folks
    • WatchesFarm
      How to recognize radioactive watches.

      By WatchesFarm · Posted

      Hello everyone, I recently received a request for advice on purchasing a vintage watch, a Waltham A-11 ORD. DEPT. I asked if they were aware that these types of watches have radioactive hands and dials... but they had no idea what I was talking about. So, I thought of creating a video that could help recognize them, starting from the distinctive details to using a Geiger counter. I hope you like it and find it useful for those venturing into the world of vintage watches. Bye.     
×
×
  • Create New...