Help With Tudor 2671 Winding Stem Removal

[suparobg]

I have attatched a picture or 2 is there a screw on this movement or a button type release on this 2671 Tudor Princess Date movement

I need to remove the stem.

Let me know the steps to take and how it should be prepped.

Thanks

[SeikoWatch]

Between the 2 screws, you see a tiny slot. push it and the take out the stem.... from what I see, it seems taht's the only way to do...

Edited April 3, 2014 by SeikoWatch

[suparobg]

any idea how far to push it in, I hear that some movements if you push down to far it might mess things up. Sorry I'm not technical when it comes to the wording. Just the basics like crown,crystal,stem, rotor etc.

i will give that a try

thanks

[SeikoWatch]

I don't how far 'cause I've never had problems with it.. oh and welcome in this forum ;)

[DJW]

I'm sure others who have done this more than I will give you direction...

 

But, From what I can remember, use a screw driver about the same width as the slot to push the pin in. You don't want to push the pin is farther than the slot shoulders will allow as this will cause the retaining pin to slip out of place. Then it may require disassembly to replace the retaining mechanism

[Lee]

just don't push it in when you refit the stem, you should be able to turn it back into the movement without touching the button, its often when you put the stem back in you get problems with it disappearing (if you push it)

[suparobg]

I got it out but now I can't seem to get the movement straight into the case. I had to remove one case clamp and screw on one side to get the movement to slip in level now not sure how to put back the case clamp. Wish there was some sort of video on the removal and replacement of the 2671 Tudor movement.

I will keep looking to try and figure it out. This is my first time. The watch came with the movement out of the case so it could be called watch parts for customs reasons. Now just have to put it back together.

[suparobg]

i wish there was a how to video on this 

[DJW]

I don't think that is even the right clip for this application(?) I would guess it should look just live the other retaining clip on the other side of the movement.

[suparobg]

Oh crap. How do I get one of those. I bought this watch used so might be stuff wrong.