Jump to content

Trouble Finding A Gasket For A Mrp Sa Case

rogart63

By rogart63
in Watch Repairs Help & Advice

 Share

Recommended Posts

rogart63 Distinguished Member

rogart63

Posted
Posted

Have a Nautilus Watch that would need a new gasket . But i seam to drawn zero? The case is a MRP SA 503305 diving watch case . This cases was used by a lot of different watchmakers .Such as Tag Heuer,Eterna,Candino,Nautilus and more . I have search Ebay and tried different stores that sells O-rings? The gasket is square in shape? Maybe it has been round from the beginning? 32,2 mm in innerdia 34.6 and 1,2 mm in high. 

Link to comment
Share on other sites
bobm12 Distinguished Member

bobm12

Posted
Posted

Hi rogart, It must very well have been round originally and taken the square shape of the case...I've seen other watches, being square, using a round gasket that "becomes" square once you install it. I myself, not having square gaskets, have fitted square cases with round ones. Not a problem.

 

I hope it helps,

 

Cheers,

 

Bob

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      Maybe you had a bad one H, the cheap blue one i use has been fine for nearly 3 years now. It demags enough to stop the tiniest of screws sticking to the carbon steel tweezers i use. If it were to fail at some point in the future i very  probably would go up a level of device just because. 
    • tomh207
      Chinese clone demagnetizers

      By tomh207 · Posted

      Lot of “industrial “ de magnifiers on Aliexpress  https://www.aliexpress.com/item/1005004699640024.html?src=google&src=google&albch=shopping&acnt=708-803-3821&slnk=&plac=&mtctp=&albbt=Google_7_shopping&albagn=888888&isSmbAutoCall=false&needSmbHouyi=false&albcp=17858129175&albag=&trgt=&crea=en1005004699640024&netw=x&device=c&albpg=&albpd=en1005004699640024&gad_source=1&gclid=CjwKCAjwo6GyBhBwEiwAzQTmcxIEVpMt1vFIKQyfjVwT95zrBsOi5dt-GgFOmLamBcMcu4tO7CfaaxoChnEQAvD_BwE&gclsrc=aw.ds&aff_fcid=b7140f118e144db7876d074872aec9cb-1716029308364-08531-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=b7140f118e144db7876d074872aec9cb-1716029308364-08531-UneMJZVf&terminal_id=6b7c60e41b044cb39d1431f62cda0958&afSmartRedirect=y   a hard drive wiper/degauser would also be worth looking at.   Tom
    • VWatchie
      Chinese clone demagnetizers

      By VWatchie · Posted

      Unfortunately yes! Magnetism can wreak havoc on a mechanical watch movement if the balance hairspring becomes magnetised. The cheap blue Chinese demagnetise-rs are useless if you feed them the wrong voltage (> 110 V), and even so, they don't work very well. The one I got when I was new worked so poorly that it drove me nuts. Eventually, I was lucky to get a Greiner Magnomatic for a little money. It's an amazing tool that can be trusted to do its job perfectly in seconds. A new one comes with a price tag of  £885 excluding tax and shipping, and if you think that's a bit steep (I believe most of us would) and can't find a used one I'd go with @Jon's recommendation.
    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      Yep Mike , i use exactly the same gauge for it.
    • Neverenoughwatches
      AS 554 from 1930

      By Neverenoughwatches · Posted

      You definitely pick up different names from different people of all ages from everywhere. Like learning different dialects of the same language. Its all part of the learning curve of any trade.  Both those two terms describe to me perfectly that they are one and the same. After a couple of years of knowledge you can figure out what is being talked about. There are times that i get caught out with something i haven't encountered before. 
×
×
  • Create New...