Seiko 7005-7100 Crystal replacement
-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
Posts
-
By RichardHarris123 · Posted
I think @tomh207is correct, plus it measures in inches, mm is far more useful. -
Sorry I must have confused you...many apologies. The balance staff pivot has broke. The bottom pivot. I bought and tried a Ronda 588....it has slightly more end shake that I would like but not really bad. However, looking through my microscope I can see the roller table fouling the bottom plate. The roller table has been pushed fully on. I was asking about the movement because the 588 didn't work...and the alternative seems to be a very very rare 6002....so I'm trying to pull on the expertise of this forum to see if anyone has knowledge/experience of fixing these movements. If I can get it going it would be a nice working addition to my GSTP PW collection.... cheers Alun
-
Yes, I also did not understand "flat lap". Also, what is the best file to use for this type of work?
-
Thanks for your reply....that's great advice. I'll try a do it then best I can. 👍👍 I just posted a photo 👍👍
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.