Jump to content

Balance Regulator Boot Is Loose

rehajm
 Share

Recommended Posts

rehajm Super WRT Addict

rehajm

Posted
  • Author
Posted (edited)
38 minutes ago, mikepilk said:

What's the movement? Do you have pics?

Sorry, yes…Universal Geneve 260…

IMG_1278.thumb.jpeg.6fdd0706af38b266612c17f928587312.jpeg

 

IMG_1277.thumb.jpeg.edba183b63368b60862c391b12749d44.jpeg

…I live in a Mac world and Mac doesn’t play nice with the microscope cams so a quick try- the regulator is with the twisty boot style and riveted…

IMG_1296.jpeg.edbd07187db9d63a769c3ea0bf25cb9c.jpeg

…the boot wobbles such that the spring could slip out the bottom. I’m wondering about manipulating the rivet but being so small and delicate…no room for a punch on top, but perhaps inverted on a narrow flat stump with a tap on the bottom of the boot?

...after a service I can tell amplitude is already decent even with the defect but the spring is favoring the inner pin...

Edited by rehajm
Link to comment
Share on other sites
mikepilk Distinguished Member

mikepilk

Posted
Posted

Lovely watch.  I have a 267 - similar movement with sweep seconds. (Wish it wasn't radium dial!)

If you know you can source a new part* (where from?), then I guess have a go flattening the rivet. As you say, it's going to be tricky supporting it. 

*I know parts are hard to find for these movements. I managed to trash the hairspring on mine whilst adjusting the overcoil. I waited a long time before I found a replacement.

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Marc
      Seiko 6309a diver crown replacement

      By Marc · Posted

      Interesting interpretation of "traditional". I would say that Loctite is definitely the up-to-date and appropriate stuff to use, however, it is a relatively modern solution. Before the advent of such esoteric solutions I believe that the "traditional" thread locker of choice may well have been a sugar solution. Once applied the water would evaporate and the sugar would crystalise, locking the threads tight.
    • Marc
      Pocket watch winding stem sleeve

      By Marc · Posted

      @steve1811uk close but no cigar 🙂 I don't smoke anyway. I checked in my stock of parts and that's the closest I got to your dimensions. Good luck in your search. @RichardHarris123 I have an accumulation of all sorts of odds and ends that I acquired as a result of buying up the tail ends of old watchmakers estates. Usually after all of the great stuff has been stripped out, which means that the sweepings off of the workshop floor can be had for peanuts, but if you have the patience, can often be found to contain gold (both literally and figuratively 🙂 ). These came to me through on of those purchases. I doubt that I will personally be able to make use of even 10% of my accumulated stock, but having it, and knowing what I have, means that I can at least pass bits on to those who can use it whenever possible.
    • Curare
      Spell Check

      By Curare · Posted

      Hi and thank-you for your suggestions, as per Mark's instructions I checked my browser "Safari" and spell check and grammar was not ticked. So all sorted. Thanks CJ  
    • RichardHarris123
      Seiko 6309a diver crown replacement

      By RichardHarris123 · Posted

      As an alternative, clear nail Polish, the advantage is you can have a manicure at the same time. 
    • VWatchie
      Spell Check

      By VWatchie · Posted

      I use Grammarly. It works really well and If English is not your first language, you will also receive help with formulations. There is a free version that covers most of my needs. It installs as a plug-in and works with all browsers and word processors.
×
×
  • Create New...