Jump to content

Watch repairer Yorkshire

John78

By John78
in Introduce Yourself Here

 Share

Recommended Posts

John78 New Member

John78

Posted
Posted

Hi guys,

I’m new to the forum so I guess best thing would be to briefly introduce myself.

I’m passionate about 1950’s mechanical watches but don’t know a lot about them other than the design.

I had them periodically serviced by an Italian watch repairer but since Brexit I’m a bit in despair.

I’ve got an 852 calibre 1953 automatic IWC which is suddenly losing almost 40 seconds a day and I’m inclined to think it might need a new mainspring.

I’m based in Yorkshire and was wondering if you could be so kind to suggest me a watch repairer who could inspect the watch?

it’s not worth more than £1000 so I’m ideally looking for an independent who knows what is doing but won’t charge me an arm and a leg.

Thanks for your interest,

Tullio

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Waggy
      404 Club Reboot

      By Waggy · Posted

      Lets give it to the end of this month to get all the votes in, then we can call it?
    • Waggy
      Without Our Forum

      By Waggy · Posted

      OK, I have created a solution to the above, I have made a fake protonmail account, if you PM me I can send you the password, just click on the contact link and enter your information, this should be as secure as it gets:   Website:     Link Login: email as highlighted in above screenshot WRTArk    @   Proton.    me Password: ..........PM me and I'll let you know   Only intend to use the contacts function, not the email or anything else - we are all grown ups, please act responsibly.
    • eccentric59
      404 Club Reboot

      By eccentric59 · Posted

      I went with 8.90£ because 12th century Italian mathematicians are always excellent topics to bring up when trying to get your guests to go home. 
    • Zendoc
      Without Our Forum

      By Zendoc · Posted

      As a beginner, I’ve found this forum invaluable. I doubt I would’ve persevered without its support. I’ve had the confidence to attempt things that seemed to me impossible only because I knew there were patient and giving folks gathered around this watering hole, available to share their skill.    I would very much like to know where to go if this one dries up and everyone needs to decamp.  There’s something special about the folks gathered in this group.  How to keep in touch?  
    • eccentric59
      Boley lathe motor silly question.

      By eccentric59 · Posted

      After a 3-week work fiasco that took up 137% of my time, I was finally able to get back to restoring a G. Boley 8mm lathe I picked up on eBay. I still need to do a bit of polishing on the tailstock but it works very nicely. Before and after pictures below. In any case, when I was reassembling the motor I wasn't quite sure which side the pully attached to, or if it matters. My question is ... does it matter? The listing photo below shows it the reverse of how I have it now, but it seemed that the cord and the reversing lever(s) should be on the right away from the belt.   
×
×
  • Create New...