Jump to content

Hello From South Carolina

MechEngineer31

By MechEngineer31
in Introduce Yourself Here

 Share

Recommended Posts

MechEngineer31 New Member

MechEngineer31

Posted
Posted

Hello everyone, new to the forum & still new the Wonderful World of Horology despite always having had a major interest in it since childhood.  Well I'm 37 years old now & I'm trying to break into starting a new career in the industry as a watchmaker/watch repairer.  So any & all advice I can receive will be greatly appreciated.  Thanks in advance to all.  

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

Welcome to the forum MechEng.

There is a great mix of both amateur and professional watch repairers here, I myself am from the amateur side of the fence. Hopefully some of the professionals will pitch in and give you some advice on how to proceed with your new chosen career.

  • Like 1
Link to comment
Share on other sites
swordfish Watch Enthusiast

swordfish

Posted
Posted

Since you ask for advice...I don't know what your actual skill level is. It's possible that you don't either. I think it's unwise to start a service industry career if your skills are not yet adequate. I recommend your buying a few dozen non-working watches. If you can repair all of them in a reasonable amount of time for each (such that your time x desired hourly income for the work satisfies you) you could reasonably proceed. I advise you not give up your current job as you begin the new career. Realistically, there is a high failure rate in new careers. Instead, find a source of piecemeal assignments—for example, a kiosk where watch batteries are replaced may get requests for real watch repair, and could refer those customers to you (for a modest finder's fee). If that works, you could advertise cheaply in local newspapers, Craig's list, etc. Only if you find that you enjoy watch repair when it is a job, not a hobby, and the demand is eating into your other employment time, should you proceed to establish the new career.

It's a good idea, before you start, to define what is success and what is failure, in objective terms, to be measured at a pre-determined time. That reduces the risk of your getting carried away pursuing an ever-receding dream that will not be fulfilled.

It's because I wish you success that I give you this bracing advice. Good luck.

Sent from my iPad using Tapatalk

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Hawaiikook808
      Seitz Tool - Help determine if Seitz or not

      By Hawaiikook808 · Posted

      Thanks, ManSkirtBrew.  I started looking for a setup like yours and ran across this.  It was about half the price of the JKA Feintaster (depending on what auction you were in), and it's a Bergeon.  I bought it because I thought the price was fair (eBay - Buy it now), and I'm a sucker for vintage tools. It also has a table, so it should be easy to use for measuring jewels. I wonder if the the contact points can be changed out. Bergeon seems to manufacture new tables and accessories for the contemporary dial version. What do you guys think of it? I'm sorry this post seems to have taken a detour. I'm new here so let me know if I should start a new topic.
    • nevenbekriev
      Winding pinion making

      By nevenbekriev · Posted

      This is a flying cutter, usual one. The cutter itself is shown in the pictures in the first message, it is made of broken tungsten carbide drill bit. I asure that all the angles of the cutter are as they should be. I have video - little older one - that I made when onse making the same kind of winding pinion for a Poljot 2200, which is even smaller than this one. It is not easy to see in the video, but the tool rest moves about 1mm towards the object in Y direction and then returns back untill cutter is rotating. Then the spindle is rotated one tooth ahead and everything repeated untill all teeth are cut.
    • Trav2004
      Help Identifying movement

      By Trav2004 · Posted

      After a bit further research could it possibly be an AS 970?
    • Bonefixer
      FHF70 balance jewels settings

      By Bonefixer · Posted

      Latest project was a non-running ebay purchase with an FHF70 movement. I stripped and cleaned it, reassembled it, and got it running. So far so good, nothing damaged AFAIK.  I was oiling the top jewel on the balance (the one in the cock) which was a slightly unusual shock setting. I removed the spring (3 leaves) which was part of a chaton holding the cap jewel. This left the hole jewel behind which I retrieved with rodico and then lost it. I was taking it off the rodico, very gently as I thought, with tweezers, and then it just disappeared.  Fast forward a week, I got a donor movement, non-running, with the plan to just take the shock jewel that I’d lost. It was the same movement but had standard incabloc settings, and was steel rather than copper/brass.  I changed the cock and balance complete and it ran, not very well. I switched the lower jewel setting, cleaned and oiled both jewels and the replacement balance. Without the pallet fork the balance swings very nicely with a puff of air. With the fork in place, balance out, it flicks side to side nicely with power in the mainspring.  Put them together and it doesn’t run. The impulse jewel sits in the fork and it stops.      Any suggestions how I proceed? In case you didn’t follow that I have 2 FHF70 movements, nothing broken as far as I can tell, but mixing up the balance wheels and jewel settings results in a non runner. 
    • Neverenoughwatches
      Part swapper to part maker

      By Neverenoughwatches · Posted

      Oh and this almost perfect third wheel pivot and slightly set mainspring  Ah ok yes i see what you mean, good idea. I'll try that if i fluff this one up. The image isn't great quality but i like the idea though.
×
×
  • Create New...