Jump to content

Radial Brushing Attempt Without A Lapping Machine

thor447

By thor447
in Polishing & Refinishing

 Share

Recommended Posts

thor447 WRT Addict

thor447

Posted
Posted

I’ve got a case that I’d like to do some radial brushing on.   A lapping machine is far out of my budget, so I tried to improvise this evening. 

I secured the case between a nylon washer and one of my plastic crystal dies.  I chucked it into a drill, and then used that to align it at the proper angle against a brushing wheel.   

It’s clearly not perfect, but I think the concept is sound.   I’ll probably need something different other than a thick brushing wheel to get the desired effect, so I’ll play around with it a bit more. I am encouraged that this may be a workaround to a very expensive tool.  

Obviously a lapping machine can do many other things, but I’m just trying to accomplish this radial brushing for now.  

About two weeks ago I came up with a very crude way of holding a case back centered and allowing it to spin, so I can apply radial brushing to that part. It seemed to work pretty well.

The first two pictures are before my brushing attempt on the case. 

IMG_3675.thumb.jpeg.a350fe0629a376d4ceebc312914c3836.jpegIMG_3676.thumb.jpeg.735dc18901699cde6418535fe5d53118.jpegIMG_3678.thumb.jpeg.964828508cf8ddfdb28599ad3eeb1b39.jpeg

  • Like 7
Link to comment
Share on other sites
thor447 WRT Addict

thor447

Posted
  • Author
Posted
17 hours ago, mikepilk said:

What kind of wheel did you use for the brushing?

As it turns out, not a correct wheel to accomplish what I was wanting, but it worked moderately.  It was a Bergeon 6085-E2 wheel.  I aligned the case to the corner edge of that wheel in an attempt to minimize the amount of contact (width wise) with the case at any given time. 

Just messing around with an idea, but it got me thinking immediately about ways to improve it.

Link to comment
Share on other sites
  • 1 month later...
thor447 WRT Addict

thor447

Posted
  • Author
Posted

Well I happen to score a Horotec polishing vice for a song on eBay.  I was able to call up a friend with a lathe and got an adapter machined so I could mount it to my motor arbor. Horotec sells a reduction die, but the size wasn't compatible with the arbor on my motor. I got this little part made, then drilled and tapped a few set screw holes for the arbor side. I can't wait to destroy a few junk case backs & bezels while I learn how to use it properly!

IMG_3906.thumb.jpg.ab43fe79a670cbacf203bc7cf1d7278a.jpg

 

 

  • Like 2
Link to comment
Share on other sites
mikepilk Distinguished Member

mikepilk

Posted
Posted

I usually use 400 grit wet and dry (used dry). 

For straight grain, this is my cheapo set up. It works really well. I stick the case back to the bracket with some Rodico. Running along the wood means I can run it up and down and keep the grain straight. 
If the case back is not absolutely flat, I put a very thin layer of something spongy under the paper (I use some thin packing foam).

For circular grain, I use 400 grit on a stick, and pull it from the centre out.

I don't have space for a bench polisher so have to use a Dremel type tool. With practice I can get a good finish.

20231117_173527.thumb.jpg.c602b85e30184995799526798358e17e.jpg

  • Like 5
Link to comment
Share on other sites
Waggy Distinguished Member

Waggy

Posted
Posted
5 minutes ago, mikepilk said:

For straight grain, this is my cheapo set up. It works really well. I stick the case back to the bracket with some Rodico. Running along the wood means I can run it up and down and keep the grain straight. 

Sometimes the simplest solutions are the best - consider this copied 🙂

 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • tomh207
      Standard crystals to replace tension ring crystals

      By tomh207 · Posted

      As always in this game the answer is “it depends “ because the first one worked out ok doesn’t mean all will. A case could be made in a way that it would not really matter much, sounds like your first example. However a case could also be made so that only a tension armoured crystal could be used. Generally you replace like for like to maintain the integrity of the watch.   Tom
    • ColinC
      Standard crystals to replace tension ring crystals

      By ColinC · Posted

      When can you use a standard crystal to replace one that had a tension ring? The first time I popped a crystal with a tension ring out of a watch I found that I had a suitable sized standard crystal and decided to try that.  It fit nicely and it was hard to see that anything was missing from the watch.  I understand that it probably reduced the water resistance of the watch but since it was an old dress watch it wasn't going for a swim anyway! I have since tried the same thing on another watch and found that the tension ring seemed to have an additional role of holding the dial in place.  With the standard crystal in there the dial and movement falls forward. This means it rattles in the case and falls forward and the hands fowl on the crystal (when the dial is down). Is there a trick I am missing here or does this watch require a special crystal?  I am reluctant to buy an expensive armoured crystal only to find I have the same problem.  
    • Levine98
      Chinese clone demagnetizers

      By Levine98 · Posted

      So I wrapped the anvil it in bubble wrap and passed ot through the demag only. Still no go—the unit is simply too strong.  next experiment is to use a VARIAC to lower the voltage and see if that reduces the magnetic field. 
    • VWatchie
      Need some crystal replacement advice

      By VWatchie · Posted

      In this case, the underside of the crystal is flat so I assume I don't have to worry about clearance to the hands. However, perhaps I'm missing something. If so, please let me know. I guess no one has the patience to get into the details of my first post so here's a simplified version of my question: The case diameter for the glass gasket is 36.9mm. However, Cousins doesn't have a glass gasket with that diameter. The closest are 36.8mm and 37.0mm. Would any of those two options work, and if so which one? I have no problem ordering both and testing them, but If someone already knows it is pointless, there's no reason to order. No, I haven't. Is there someone you can recommend? Preferably in Europe. Thanks!
    • rjenkinsgb
      Dangerous substances when disassembling timex indigloo?

      By rjenkinsgb · Posted

      No. It's incredibly volatile and evaporates in seconds; there is no way it would last as long as it took to just install the part cleaned in it, in the movement.  
×
×
  • Create New...