Jump to content

Unitas 6380

Gaus
 Share

Recommended Posts

Gaus WRT Addict

Gaus

Posted
Posted

Hello watchfriends, I have a question. I have serviced an Unitas 6380. I seems the run very nice. When I look at the timegrapher I see a nice line crown down and crown right, but very bad readings dial up and dial down. I cleaned and oiled the top and bottom jewels. What could be the problem. Any suggestions? Thank you all in advance. Gr. Hans 

Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted

always nice to take pictures so we can see what you're seeing. I suppose if you like I could guess but I personally would like to see the pictures of the timing machine to see what else is going on.

Then what was the watch doing before you service the watch?

Link to comment
Share on other sites
Gaus WRT Addict

Gaus

Posted
  • Author
Posted

I have made a rare observation. Because the movement looks to be running nice. I put it together and in the case. Then I looked again and now the timegrapher readings were okay. Now I have another problem. Whats wrong with my timegrapher? 🙂  

Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted
23 minutes ago, Gaus said:

Now I have another problem. Whats wrong with my timegrapher?

it's probably not the timing machine that's the problem. It's probably a user mistake?

for instance how are you holding the movement and the holder versus when you have it in the case? Or procedures like you wind it up nice and tight and put on the timing machine versus its run a little bit and now it looks better etc.? Plus it's still would've been nice to have pictures

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      Maybe you had a bad one H, the cheap blue one i use has been fine for nearly 3 years now. It demags enough to stop the tiniest of screws sticking to the carbon steel tweezers i use. If it were to fail at some point in the future i very  probably would go up a level of device just because. 
    • tomh207
      Chinese clone demagnetizers

      By tomh207 · Posted

      Lot of “industrial “ de magnifiers on Aliexpress  https://www.aliexpress.com/item/1005004699640024.html?src=google&src=google&albch=shopping&acnt=708-803-3821&slnk=&plac=&mtctp=&albbt=Google_7_shopping&albagn=888888&isSmbAutoCall=false&needSmbHouyi=false&albcp=17858129175&albag=&trgt=&crea=en1005004699640024&netw=x&device=c&albpg=&albpd=en1005004699640024&gad_source=1&gclid=CjwKCAjwo6GyBhBwEiwAzQTmcxIEVpMt1vFIKQyfjVwT95zrBsOi5dt-GgFOmLamBcMcu4tO7CfaaxoChnEQAvD_BwE&gclsrc=aw.ds&aff_fcid=b7140f118e144db7876d074872aec9cb-1716029308364-08531-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=b7140f118e144db7876d074872aec9cb-1716029308364-08531-UneMJZVf&terminal_id=6b7c60e41b044cb39d1431f62cda0958&afSmartRedirect=y   a hard drive wiper/degauser would also be worth looking at.   Tom
    • VWatchie
      Chinese clone demagnetizers

      By VWatchie · Posted

      Unfortunately yes! Magnetism can wreak havoc on a mechanical watch movement if the balance hairspring becomes magnetised. The cheap blue Chinese demagnetise-rs are useless if you feed them the wrong voltage (> 110 V), and even so, they don't work very well. The one I got when I was new worked so poorly that it drove me nuts. Eventually, I was lucky to get a Greiner Magnomatic for a little money. It's an amazing tool that can be trusted to do its job perfectly in seconds. A new one comes with a price tag of  £885 excluding tax and shipping, and if you think that's a bit steep (I believe most of us would) and can't find a used one I'd go with @Jon's recommendation.
    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      Yep Mike , i use exactly the same gauge for it.
    • Neverenoughwatches
      AS 554 from 1930

      By Neverenoughwatches · Posted

      You definitely pick up different names from different people of all ages from everywhere. Like learning different dialects of the same language. Its all part of the learning curve of any trade.  Both those two terms describe to me perfectly that they are one and the same. After a couple of years of knowledge you can figure out what is being talked about. There are times that i get caught out with something i haven't encountered before. 
×
×
  • Create New...