Jump to content

Recommended Posts

Posted

I recently started working on Welsbro watch which has an A. Schild 1002 movement.  It is a simple movement and it has been great for learning and perfecting some skills.  Is there a way 

to find out which watch manufacturers have used this movement?  I'd like to work on a few more before moving onto automatic movements.  

Welsbro (2).png

Posted
6 minutes ago, Mike78 said:

I recently started working on Welsbro watch which has an A. Schild 1002 movement.  It is a simple movement and it has been great for learning and perfecting some skills.  Is there a way 

to find out which watch manufacturers have used this movement?  I'd like to work on a few more before moving onto automatic movements.  

Welsbro (2).png

Eyup Mike just ebay search AS 1002. It was likely used by hundreds of watch brands and bought in by manufacturers as well.

Posted
2 hours ago, Mike78 said:

to find out which watch manufacturers have used this movement?

I don't think you're going to find an answer to that question. As you're aware looking at a watch in a case that sealed you don't know what's inside.

We have sites like the one below or you can look up cross references of parts and sword of may be. What I mean by that is the look of the parts for the watch to see what other watches cross reference but typically the watches of the same company which doesn't help with the wall sometimes you might find other companies that use the same movement which is one of the reasons cross reference sites like this exist but finding out that some other company may have used the movement still doesn't help you because you can't look at the watch on eBay for instance and know exactly what is inside unless somebody takes the back off.

on the other hand not knowing what's inside often times on this group people of found spectacularly nice watches inside those cases other times well not so much it's kind of a mystery

oh and thinking about mysteries did you notice those letters on the balance bridge? this doesn't really help you either but just in case you're curious those of the US import codes and the second link lists what they are. Often times the name on the dial or even the name on the movement may not actually be who imported the watch.

http://cgi.julesborel.com/

http://www.ranfft.de/uhr/info-uscode-e.html

 

Posted
11 minutes ago, JohnR725 said:

but finding out that some other company may have used the movement still doesn't help you because you can't look at the watch on eBay for instance and know exactly what is inside unless somebody takes the back off.

If the seller has half a clue they often name the movement calibre in the description of the watch and often the listing itself. Just looking now for AS 1002 has thrown up Titus Accurist Trojan Rotary Liga Waltham and half a dozen others i haven't heard of. The calibre isn't exclusive to the brands but a starting point of where to look for more of that calibre. The brand may have kept to using just a few makers if they were happy with their contracts with them.

  • Like 1
Posted
On 7/4/2023 at 4:33 PM, JohnR725 said:

 

oh and thinking about mysteries did you notice those letters on the balance bridge? this doesn't really help you either but just in case you're curious those of the US import codes and the second link lists what they are. Often times the name on the dial or even the name on the movement may not actually be who imported the watch.

http://cgi.julesborel.com/

http://www.ranfft.de/uhr/info-uscode-e.html

 

That's cool.  I had no idea the letters on the balance bridge meant something.  Looks like it was Welsbro watch company that imported it.  Thanks for info.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • My profile photo is age 20, last century, but I still look exactly the same so I'm not sure it counts ¯\_(ツ)_/¯
    • I sure appreciate your comment! I will look into one of those or maybe something similar. I of course will check your video to have a better idea.  by the way, that’s a beautiful lathe! Mine is a little peersless, but I just bought a Boley & Leinen that is on its way. That’s the one I am looking a motor for. It comes with a motor, but I want to replace it for  one that has a speed controller.
    • Indeed. I would not attempt one. Here is my messy Sherline setup
    • Hello everyone my name is Tom and I and I am new to the forum and new to the hobby. I have always had an interest in mechanical watches and finally decided to pursue it. I’m going thru online trading and have purchased the basic tools to set up a work area. I’m really looking forward to learning and thank you in advance for all of your knowledge!
    • This conversation is becoming a very confusing. The etachron system is a very nice system for manufacturing watches. As you know it consists of two components the stud and the regulator pins. Beautiful thing of this system is you can open up your regulator pins center the hairspring and as you close the pins they will close equally on both sides providing you centered it in the first place. It's not like you're going to become closer to one side or the other as the definition of the regulator pins is a bit confusing it's not exactly a slot sort of. I'm thinking maybe a little eight reading will be helpful for you. Then the file name was changed by me at the US patent but the wording of Seiko may or may not actually be attached to it soared up? I just did that so I can find it in my files. Normally patents are in people's name if they work for a company the company name will be there you'll notice the person lives in Japan which is interesting as the name would imply that this is a Swiss product. Somewhere I think I have the patents for the stud and I believe that is Swiss like a lot of things their Japanese and Swiss and then the Japanese let the Swiss name stand as it seems you more popular in case as you read up on the patents of the regulator pins or pin will see and it should explain exactly how and why it works also why it's important to always close at an open in specific directions because the pins actually have a shaped to them it's very hard to see the shape as it's very tiny.   As a reminder with this system it's mass-produced. I wouldn't be at all surprised if they use cameras and computers to do all of the adjustments.  The meaning of this is that the majority of watches will function as there supposed to and do what they're supposed to do the system will allow us for some minor in tolerance and has more than likely as I said no human hand is ever touched those watches that's the way they left the factory and they work fine. US2007091729A1 seiko etachron.pdf
×
×
  • Create New...