Jump to content

Parts watch storage

kd8tzc
 Share

Recommended Posts

kd8tzc WRT Addict

kd8tzc

Posted
Posted

Now that I have worked on a few watches, I have started to develop some "spare" parts watches.  I'm just curious, how do you all store these?  Most I have put together as complete as possible, but others have some pieces not in them (I just haven't put them back in) and are in parts trays.  I'd like to do something with all these, but I'm not sure if I should reassemble them, or if there is a good way to just keep how they are and not forget a) what it is and what watch it goes to, b) parts safe from damage.

One watch I put in a small zip lock bag with a piece of watch paper that has written on it what that movement is missing and then I placed that in my wooden tool box.  This concerns me though as nothing is protecting it (no, it's not in  case of anything... just a loose movement).  The pieces that are loose (hands, dial, hour wheel, and a few other small things) are in a small parts bag so they won't get into the movement.

Anyhow, what do you all do?

Link to comment
Share on other sites
GuyMontag Super WRT Addict

GuyMontag

Posted
Posted (edited)

Coin envelopes with the movement written on the outside in alphabetical order. If it's just parts they go in an old tin fuse container and then in the envelope. I will write on the outside of the envelope whatever part I "harvest". I tend to put the movement back together if I have to take out a part(s).

movements.thumb.jpg.4a6d95e3b79a31a626e6ab4bd982409b.jpg

Edited by GuyMontag
Link to comment
Share on other sites
GuyMontag Super WRT Addict

GuyMontag

Posted
Posted
9 minutes ago, spectre6000 said:

I use these for loose movements. I keep needing to remember to order more, as they come in handy for many watchmaking things.

https://www.cousinsuk.com/product/aluminium-pots-in-aluminium-box

For cased movements, I have a small cardboard box with a nice closure with a colorfully worded label.

Those look pretty nifty, I like the glass tops so you can see what's inside. And they are surprisingly cheap!

Link to comment
Share on other sites
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
Posted
On 5/9/2023 at 12:54 PM, kd8tzc said:

Now that I have worked on a few watches, I have started to develop some "spare" parts watches.  I'm just curious, how do you all store these?  Most I have put together as complete as possible, but others have some pieces not in them (I just haven't put them back in) and are in parts trays.  I'd like to do something with all these, but I'm not sure if I should reassemble them, or if there is a good way to just keep how they are and not forget a) what it is and what watch it goes to, b) parts safe from damage.

One watch I put in a small zip lock bag with a piece of watch paper that has written on it what that movement is missing and then I placed that in my wooden tool box.  This concerns me though as nothing is protecting it (no, it's not in  case of anything... just a loose movement).  The pieces that are loose (hands, dial, hour wheel, and a few other small things) are in a small parts bag so they won't get into the movement.

Anyhow, what do you all do?

Any watches i have that are beyond repair at the moment are stored fully assembled in mini zip lock bags and then placed in egg boxes. By being assembled they are protected attached to the calibre that they belong to also providing a premade up walkthrough if needed ( trust me you will forget the assembly order over time ). The zip lock bags offers a moisure barrier, the egg boxes gives further protection keeping them seperate  and are easily stacked. You could also chuck a silica gel sachet in the box if you felt like it.

On 5/9/2023 at 4:51 PM, kd8tzc said:

That's a great idea (and inexpensive) for the coin envelopes.

Keep in mind the environment in which you live. Here in the Uk people are struggling to keep their houses dry and warm due to ridiculous energy costs. In winter older housing structures can be cold and damp without constant heat. Plastic bags are a permanent moisure barrier, regular paper is hygroscopic. VCI paper is a good alternative with good anti moisture properties. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Stem removal after fitting hands

      By Neverenoughwatches · Posted

      That's the right technique Mal 👍 If you are ok with a loupe ( which I'm not ) then pick up the dial in your left hand and make a tripod holder out of 3 fingers and then exactly how Mal and me described with your right hand, press and flick out the stem at the same time. You need three fingers to do this, i use my ring ring finger , sounds like mal uses his little finger, just whatever you feel comfortable with. The key point and dangerous side to this is the tweezers or driver slipping off the release screw. Stablise your left arm by resting your elbow on your bench, so that you can hold the movement horizontally flat, use a x5 loupe to view  and good light so you can see well and have a good tight fitting screwdriver to push the release down. Or as suggested a pusher mounted solid upside-down somewhere then all you need to do is push your movement up to it. I'll rig something up in a bit to show you what i mean.
    • Neverenoughwatches
      Leaving the forum for a while.

      By Neverenoughwatches · Posted

      Thanks Michael, shes a real soldier, it would take a tank to knock her off her feet.  Shes surprised even me and i knew she was a tough cookie.  Good for you Michael, you keep at it. I've been reading your posts re. your watchroom they're inspiring and it doesn't matter how long it takes you to get there its about the journey. Rome wasn't built in a day, our watchcaves are our solitudes, our own little empires where we can shut ourselves away from the crap that goes on around us in the world. I look forward to seeing you progress, I have my own ideas how i like to do things. But in answer to your questions on that thread, just let your workspace evolve around you and how you work. You wont figure it out straight away but you will know when to change it and when to leave it alone. But most of all just enjoy it.
    • Malocchio
      Stem removal after fitting hands

      By Malocchio · Posted

      That can be tricky. Sometimes I hold the movement from the edges in left hand and with right hand I push the release with tweezers and simultaneously pull the stem out with right hand pinky or something. 
    • PeterS
      Stem removal after fitting hands

      By PeterS · Posted

      I see what you mean. I must admit I’m not entirely comfortable with that but I can’t see a better method than what you suggest. I’d like to see something like this mirror with a short spike: https://www.cousinsuk.com/product/mirror-for-observing-movements Place it on, push the spike on the post with one hand and release the stem with the other hand. Minor problem, it doesn’t exist.
    • Michael1962
      Leaving the forum for a while.

      By Michael1962 · Posted

      Hope you mum keeps on mending. I was adamant that I was going to get myself going after my stroke. I was only 52. I still have a lot of life left to live. Some people give up. Some people don't let it beat them. Your mum sounds like one of the winners. 👍
×
×
  • Create New...