Jump to content

Watch Case Tubes

mcoulton
 Share

Recommended Posts

mikepilk Distinguished Member

mikepilk

Posted
Posted (edited)

Depending on the price, and how many watches you do, it might be worth it. Cousins sell tubes by size, but only in packs of 12, so not especially cheap.

It might be worth waiting until you actually need a new tubes. I only service my own watches, and (in the 60-70) I've never needed new pendant tubes. 

 

Edited by mikepilk
typo
  • Like 1
Link to comment
Share on other sites
mcoulton Watch Enthusiast

mcoulton

Posted
  • Author
Posted

Okay. Thanks for the advice. Wouldn't you know it I have a watch that it looks like the tube has been replace as the crown (without the stem) doesn't snuggle up to the watch case, so I figure it must have been replaced. I might revisit this restoration if I ever have a need to replace a tube on another project.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Case Tube Tool - Quest for one that works

      By Neverenoughwatches · Posted

      Now thats a real man's tool press 👍. I have one just like it in my back garden for when just CANT fix a watch . Its not something i have had to do yet, @Waggybut wouldn't any type of press be able to do this ? What about an adapted chain link  extractor work or a micrometer with some sleeve pushers made to slot over the ends. @Waggy Found something that could work Scott, comes with different size pins and pushers. Only bit that would need making is a round former to support the inside of the case, a piece of stout timber, bit of oak or mdf might do it. What i like about this one is the pin is pushed in, its in a sliding sleeve so it doesn't turn while its being driven. This has 4 pin sizes and 3 stumps as well so it will come in for other applications, the pins could be adapted to take other accessories from jewelling tools. I've just ordered one myself for some play time. 
    • Mperss920
      Seiko 6309a diver crown replacement

      By Mperss920 · Posted

      So I purchased this one based on my case number being listed. (Unless my case number is incorrect. The last digits are faint)
    • HectorLooi
      Case Tube Tool - Quest for one that works

      By HectorLooi · Posted

      I have the same tool from AliExpress and get the same anxiety when when using it. But you have to admit it looks awesome on your tool shelf. Makes you look like a pro. 🤣 Looking at the photo of the Horotec tool, it looks equally flimsy. It probably comes from the same factory. I was thinking of using the pushers supplied with the tool and making a hand tool from a cranked jeweller's punch. I'll grind off the tip of the punch and drill a hole at the end to fit the pusher in. The cranked shank would be able to clear the watch case give a straight in-line axis to exert force to tap the pendant tube out. Should be robust enough to last several lifetimes. I wonder why nobody makes it. 🤔
    • VWatchie
      “Professionally” serviced, I promise. Zenith 146HP

      By VWatchie · Posted

      It reminds me of Ukrainian eBay sellers of Russian watches. More often than not the listings include the phrase "Serviced by Master Watchmaker". Of course, they never are, and it should be expected. It's the most corrupt country in Europe, definitely on par with Russia. Today our tiny country (Sweden) sent them another $1 232 255 518 with no accountability whatsoever for how the money will be used.
    • oldhippy
      Case Tube Tool - Quest for one that works

      By oldhippy · Posted

      Now that is taking it a bit far. You are going to need a bloody big workshop.  
×
×
  • Create New...