Jump to content

Ingersoll Junior Pocket Watch

Bearman
 Share

Recommended Posts

Bearman WRT Addict

Bearman

Posted
Posted

I thought I'd share this as it's now the oldest watch I own which I've managed to get to imperfect perfection. It came to me in a job lot and consider myself lucky to have it come into my possession. With an unmarked crystal, paper dial and still with it bow. only missing it's second hand.

I was surprised to find it wanted to work although only just about, so I thought I'd give it a go. Somewhat nervous as I've never worked on something this old, if my interweb research is correct it dates to around 1910 or thereabouts.

After a lot of deliberation I carefully dismantled it, puzzled as to how to get it out the case and let any remaining power down (interweb helped here with some clues).  I had pictures of the thing exploding in my mind. The rust was tricky to deal with, but it had to go, sadly I lost some of the bluing, but after cleaning (filled with dirt and what appeared to be fine metal swarf) and lubrication things were looking promising.

I stopped myself breaking the tin of Brasso and a bout of polishing frenzy, on basis it took years to look like it does and it's never going to be brand new after 100 years or so. I'm glad I did as the patina feels right. 

It's been running well now keeping time as it should, and actually winds and you can set the hands. On the lookout for a replacement second hand, to finish it off.

Ingersoll rear.jpg

Ingersoll front.jpg

Ingersoll Junior front.jpg

Ingersoll junior back.jpg

  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Knebo
      Epilame / Fixodrop

      By Knebo · Posted

      Yes, I was referring to the (jewelled) gear train with HP (most of the time, I use 1300, but when Rolex says 1000, I'll use 1000).
    • JohnR725
      Without Our Forum

      By JohnR725 · Posted

      did I miss the update of the message of something changing?      
    • JohnR725
      Epilame / Fixodrop

      By JohnR725 · Posted

      I suppose it would depend upon what your lubricating with those? for instance what does the manufacturer say about those lubricants? I have a PDF from the manufacture and a rather peculiar statement found on the bottom of the chart. my suspicion is the reason the recommending would be without epilam the HP oils like the spread except when they're in Ruby jewel's with steel pivots. tableEN lubrication 2020.pdf
    • oldhippy
      Is this a 'hack' ?

      By oldhippy · Posted

      These types of hairsprings become weak with age and very fragile. Which I expect it is that giving you trouble, and that wheel is not the correct one, if it were not bent I don't think the movement would run as the teeth are not the correct height. The problem you have is price which depends on you. It can be repaired but is it worth it to you, because there is little value in the clock. A wheel can be made and hairspring replaced. Or hang on to it and keep looking on ebay which is your best bet for replacement parts or even a complete movement but it will be like finding a needle in a haystack. 
    • Knebo
      Epilame / Fixodrop

      By Knebo · Posted

      I did that also for a few movements - well, mainly in/around the train jewels. I made big efforts to epilame the mainplate WITHOUT getting Epilame into the Pallet fork jewels (where it's not supposed to be, right?). I made litte barriers with Rodico around that jewel and used drops from a syringe to apply on the rest.  However, I've now stopped doing this. For three reasons: 1. It's a hassle and consumes more of this liquid gold. 2. I didn't see the need when using HP1000/HP1300 lubricants and grease for most part. The two places where I'd use 9010 (i.e. escape wheel and balance) receive Epilame in specific places... or the cap-jewel-setting of the balance suspends the oil sufficiently be capillary action (see my "conflict" about using Epilame on the balance jewels).  3. Lastly, and here I really wonder about yours and others' experiences: I felt that applying Epliame to the train jewels left them looking hazy (borderline dirty) compared to the (painstakingly achieved) sparkly clean results of my cleaning process. I just can't help but think that the Epilame residuals would mix with the oil and cause more friction/wear. I don't know.    simple: it'll stay there. It won't move any further. That's exactly what is happening if you epilame a cap stone. You end up placing the 9010 right on top of the epilame and the oil will sit nicely on that spot.
×
×
  • Create New...