Jump to content

New Video Uploaded. A Primer On Regulating A Watch.


Recommended Posts

A much awaited video Mark, I am eagerly looking forward to the follow-ups.  You asked for feedback as to topics for inclusion in future videos on regulating watches.

I am particularly interested in what position should be the start position for regulating a normal wristwatch worn on the left wrist,and what is the next sequence of positions.

My chrissie present was a timegrapher and I now see that some of my watches that ran perfectly (!) may not be doing so after all !! 

I would also like to know how amplitude factors in and what is good/bad/acceptable. 

The effects of good/bad lubrication of the pallets would also be helpful.

You may well have planned these into the future videos, if so great news.

Thanks

Link to comment
Share on other sites

I haven't used Keynote for several years now so I haven't kept up to date with new features, but it has always been a very nice app. It's really blows Powerpoint out of the water.

 

As an alternative I would recommend Apple Motion, which is a bargain at $50. It has nifty things like linked behaviours which would be handy for movement simulations like the one you did in this video.

 

 

Had a really good look at Motion and it is really an amazing piece of software Rob, thanks.

I think this will really help with illustrations going forward.

Link to comment
Share on other sites

Had a really good look at Motion and it is really an amazing piece of software Rob, thanks.

I think this will really help with illustrations going forward.

 

Yes it's pretty nifty, isn't it? Granted, not as easy as Keynote but way more powerful.

 

It enables many more advanced effects. You could do green screen recordings with that piece of unmounted laminate seen in the background of the latest videos for example. ;)

Link to comment
Share on other sites

Yes it's pretty nifty, isn't it? Granted, not as easy as Keynote but way more powerful.

 

It enables many more advanced effects. You could do green screen recordings with that piece of unmounted laminate seen in the background of the latest videos for example. ;)

 

Indeed. I got a wheel spinning within a few minutes. Simples!

 

post-1-0-18367300-1428924267_thumb.png

Link to comment
Share on other sites

Hi Mark. So do I take it a quality watch a holy trinity or a Rolex would automatically be a guaranteed dead single beat line, and if so how long would it be before that reading starts to decay whether gaining or losing. Is it true that the more expensive the watch the straighter that line will be or are all watches true at first.

Edited by Craig
Link to comment
Share on other sites

 

Hi Mark. So do I take it a quality watch a holy trinity or a Rolex would automatically be a guaranteed dead single beat line, and if so how long would it be before that reading starts to decay whether gaining or losing. Is it true that the more expensive the watch the straighter that line will be or are all watches true at first.

 

 

Many expensive watches will be measured to a certain standard, the COSC Chronometer Standard for example, which would guarantee a certain level of accuracy when the watch is brand new. The fact is that measuring a watches rate on a timing machine will give you a sort of lab test reading for that moment only, not a real world test. Other things affect timekeeping such as temperature and position. But those readings are a very good guide and with a consistent accurate reading on the machine, one would expect real world usage to reflect that.

Link to comment
Share on other sites

  • 5 weeks later...


  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I went with 8.90£ because 12th century Italian mathematicians are always excellent topics to bring up when trying to get your guests to go home. 
    • As a beginner, I’ve found this forum invaluable. I doubt I would’ve persevered without its support. I’ve had the confidence to attempt things that seemed to me impossible only because I knew there were patient and giving folks gathered around this watering hole, available to share their skill.    I would very much like to know where to go if this one dries up and everyone needs to decamp.  There’s something special about the folks gathered in this group.  How to keep in touch?  
    • After a 3-week work fiasco that took up 137% of my time, I was finally able to get back to restoring a G. Boley 8mm lathe I picked up on eBay. I still need to do a bit of polishing on the tailstock but it works very nicely. Before and after pictures below. In any case, when I was reassembling the motor I wasn't quite sure which side the pully attached to, or if it matters. My question is ... does it matter? The listing photo below shows it the reverse of how I have it now, but it seemed that the cord and the reversing lever(s) should be on the right away from the belt.   
    • Thanks Richard.  That’s clear.   So - another question - how much latitude is there in barrel and spring sizing? Say I have have measured the ID of my barrel to be 9mm and (all other mainspring specs being equal), the closest match I can find for a replacement mainspring is listed with an 8.5mm barrel size, is it acceptable to fit the smaller spring in to the slightly larger barrel without compromising anything functionally?  I’m in this situation now with an AS 1686 which has a 9mm barrel, but the closest replacement I can find has an 8.5mm diameter listed in its specs.  I can find an alternative 9mm spring, but would have to accept a different thickness.  I’m unsure how much wriggle room is acceptable, or whether in mainspring sizing, there’s a priority - ie thickness over barrel size etc. Thanks again for any info.  Cheers, John  
    • We already have a Facebook group run by Mark , so this is a bit moot. Search for “Watch repair lessons” group.   Tom
×
×
  • Create New...