Jump to content

First Watch/First Watch of Your Collection?


NewToWatches

Recommended Posts

Like many children of the 70's in the U.S., my first watch was a wind-up Timex. No second hand.  I think I was 10 years old or so.  It was water resistant (thankfully) and had a golden colored bezel, squared-off hands and dark blue face.  I don't recall what happened to it -- it probably succumbed to some physical neglect in my early teen years, which put the lie to the term "shock proof." (As in "shock proof, but not teen-proof" -- not a catchy marketing phrase, but nearer to the truth.)

The first significant watch of my adult life, I bought in my early forties.  It was/is a Hamilton Khaki automatic. . . one made prior to the current long-power-reserve model.  I say "significant" because even though I wore it daily for years it was the watch that started me thinking of timepieces in more than simply utilitarian terms.   I actually purchased it because an older cousin, for whom I have a great deal of affection, wore/wears an Omega Speedmaster -- the original Moonwatch version. He was, at the time he bought it in the mid-1970's, a helicopter pilot -- and this no doubt contributed to my sense that the watch was an active accomplice in his various acts of daring. Anyway the Khaki was the watch I could afford that bore -- in my mind at least -- the greatest resemblance to the more desired timepiece.   I put the Khaki on this morning, but just switched it for a dressy Eglin automatic.  Seriously, who wears more than one watch a day?  It's a sickness, I tell you. But what a way to go . . .

So how about it WRT?  What was your first watch and then the watch that set you on your current path?  Inquiring minds want to know.

  • Like 1
Link to comment
Share on other sites

  • 1 month later...

My first was a simple round case timex with a maroon face and maroon vinyl band. Took it apart and something went, "boing" and that was the end of that watch but the beginning of my fascination.

Second watch, and the first watch I bought myself, with my first real paycheck at age 14 was another Timex; square gold tone case and dial and bracelet. Bought from the local 5 and 10 store.

Things have waxed and waned since then, but never truly gone away. The pandemic has sparked a renewed interest in the bits inside that go "boing"!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • The part was how it fell out of the movement - the train wheel bridge wasn’t screwed in.    I’ll probably dismantle the part, if I can, to work it out.    The train of wheels ran fine - it was only once the keyless works were installed I noticed the problem. 
    • Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
    • thinking of where epilam should be removed did you know there was a patent that covers this? At least for the escapement I'm attaching it. GB1057607A-1 epilame.pdf
    • Back home...printing now.  Will report results
×
×
  • Create New...