Jump to content

Hi from Geelong, Australia

Michael1962

By Michael1962
in Introduce Yourself Here

 Share

Recommended Posts

Michael1962 Distinguished Member

Michael1962

Posted
Posted

Hi everyone,

This is something I always wanted to get into and my Seiko 7016-8001 chronograph just stopping (among a raft of other issues) has only made me want to do this even more. I won't be starting with my watch. It will be going to a repairer in NSW who I have spoken to who has told me that he can do it. The repairers that the watch was sent to via the only shop that we have near where I live have not even opened the watch. Even Seiko who I called said no after I told them the calibre(?) number from the caseback. Both have just simply said 'Cannot be repaired.' Not the right thing to say to someone like myself who has rebuilt all sorts of things in my life.

I am not sure if I want to start collecting watches or clocks, but who knows where this will lead?

I am 57, oops 58 now. Is that too late to be looking at picking up a hobby such as this? I have been scouring the internet looking at things, videos and have ended up here.

Mark looks to be incredibly accomplished. I have also been perusing his courses as trying to work out which tools to consider/not consider is all a bit overwhelming so no doubt his courses make those suggestions as they go.

Anyway, hope to learn things.

Michael.

522910700_watchcopy.thumb.jpg.b647ae7c32c6708a7d010b671c8a491b.jpg

  • 5 months later...
Michael1962 Distinguished Member

Michael1962

Posted
  • Author
Posted (edited)

I didn't want to start a new topic, but I thought I would show you what I did this afternoon.

First thing I did was solder up an 8 pin mini Din plug to cable. Used my new smooth jaw pliers and they worked well.

Then I pulled this apart and fixed it.switch.thumb.jpg.9647bb4e7e647b558f2387fddc18a829.jpg

5mm square and 1.4mm thick. It's a momentary tactile switch from an LED light that I have. For working on the car, but will be using it to light the work area I am setting up at the moment. Used the bent nose smooth jaw pliers, an X-Acto knife and my new pointy nose tweezers.

Used the knife to get the tabs of the cover open from the plastic body. Then used some acetone and the knife to clean the contacts. Then cleaned the 3mm diameter spring/contact. Took the brass button out with its plastic insulator. Cleaned all that and then used the tweezers to put the top back together. Put the disc spring/contact back in then put the base back into the top. Gently used a pair of pliers to ease the metal sides back into place then squeezed down the tabs to secure it all.

It now works as it should. And I did it without a magnifier.

Why? Because I didn't want to buy 100 from India just to get one new one.

I looked at what I did and given the size, I reckon after I get my clocks sorted out, I'm going to look more seriously at Mark's course.

I don't know many people in Australia that still have analog watches. I don't know why because I much prefer the look of an analog watch. I think some of the smart watches that are on the market should be called ugly watches. Would be much more accurate.

Just had my 31st anniversary with the my wife. She bought me a pocket watch. Had it engraved. It's a quartz, but I love it.

Edited by Michael1962
  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • GregG
      How do you thread a screw on the lathe without shearing it off?

      By GregG · Posted

      Sorry @nickelsilver, I'm just seeing this now.  It is a standard metric screw plate. I followed the suggestion of doing the thread cutting in a pin vise.  It took me forever because the piece is so delicate that I cut and cleared chips very frequently.  But eventually I did get it.  Not pretty, but I got it; the first thing I ever successfully made on the lathe. I cut the screw slot with a jewelers saw.  How can I ensure that the slot is centered on the screw head?
    • RichardHarris123
      Hi from France

      By RichardHarris123 · Posted

      Hello and welcome from Leeds, England. 
    • Dsplash
      Hi from France

      By Dsplash · Posted

      Hello, My name is David and I’m a vintage watch collector/ wanna be hobbyist watchmaker from France. I really want to progress into my watch repairing hobby. For now, I’m only having fun servicing my own watches and spare movements, simple small 3 hands from the 50s (Omega, eterna…) Learning step by step or at least trying to 🙂
    • ColinC
      I haven’t seen glue here before…

      By ColinC · Posted

      More setbacks and successes...  After letting the watch run in (but before I fixed the BE) a chunk of the radium lume fell off one of the hands and pulverized leaving radioactive dust all over the dial 😞 ☢️ ☠️ So before I could continue further I decided I would remove the radium lume.  I have removed radium lume from hands before where it was already starting to flake away but this time I had to work out what I was going to do with debris on the dial.  I decided that getting everything under water and removing all the lume was probably the best way to go. So here is what I did... I put an essence jar I use for cleaning parts and filled it with water and put it into a big ziplock bag along with the tools I would need - a sharpened piece of pegwood and  a 0.80mm screwdriver  -  I put on a pair of nitrile gloves and a covid style mask and then opened the back of the watch. Now with the back off the watch I could do the rest inside the bag.  I removed the watch from the case and removed the hands from the dial (through the bag) and then undid the dial screws and removed the dial from the movement.  I then put the hands and the dial and the watch case into the water and removed the movement from the bag.  Carefully and slowly with one hand in the bag and one hand trying to poke and hold stuff through the bag I gently rubbed away the lume from the dial and hands with the pegwood. I then took the parts out of the water and removed the jar from the bag (leaving the parts still in the bag) - with the majority of the dangerous stuff now in the water I disposed of this (down the toilet) and gave the jar a good rinse in running water before refilling it and returning it to the bag where I gave all the parts another rinse in the new water.  I then took the parts and put the geiger counter over the top of them and looked at them carefully under UV light to see if there were any flakes still hanging on. I dried everything with some kitchen towel. Once I was finished will all that I remved the parts from then removed the gloves and put them in the bag with the paper towels and the pegwood and thew the bag in the household waste. Finally I gave the dial, hands and case another rinse in the sink under running water.  I didn't bother following up with a rinse in distilled water water because the water here is pretty clear of limescale etc and I find it doesn't mark! So here are the results of my weekends work! Timegrapher dial down (dial up is almost the same) The fixed shock setting New crystal - and lume removed from dial and hands
    • TimepieceTinkerer
      Hello

      By TimepieceTinkerer · Posted

      Hi and welcome! I'm new here too—greetings from Leicester, UK.
×
×
  • Create New...