Jump to content

Old Iwc "fishtail" Cal.72

MortenS
 Share

Recommended Posts

MortenS Watch Enthusiast

MortenS

Posted
Posted

Hi,

 

Some time ago I was asked to look at a pocket watch in gold that was going to be repaired before it was going for sale. The pocket watch could not be wind up, so there was something wrong with the mainspring or the stem.

 

IMG_1499_zpsa1b37451.jpg

Sadly the dial got a crack at one time, but the case was nice. The crown was not in gold, which I believe has been changed through time.

 

IMG_1497_zpsfcb1ca49.jpgIMG_1396_zpsbfe7078f.jpg

After opening the back I saw the IWC marked engraved.

 

IMG_1869_zps4aabe189.jpgIMG_1878_zpsd6dde71d.jpg

But the movement itself was not marked IWC. I looked everywhere, under the dial and the plates etc. No mark, only a production number. I thought the movement was so nicely made that I would believe that the work was also from IWC. So began the effort to find out what kind of movement this was. I looked through BidFun-db Archive: Watch Movements, which has the largest database on watch movements I know. But no no discoveries there. I looked through some other databases with pocket watches, but no findings. It was the stem that was broken. Believe it or not my local dealer with watch parts had a spare.

 

Cal71and72_zps95a64044.jpg

So after a day's exploration on the web, I searched on google on "old IWC pocket watch" and pressed the images. After I scrolled down pretty far, came this picture here forward. It resembled the movement and the kind of caliber it is.

 

IMG_1872_zps3ef2bc2d.jpg

After I googled a bit more on the actual caliber, I found not so much. But IWC produced only 600 copies of this movement between 1904 to -1917. Why so few I do not know. http://www.iwc.com/forum/en/discussion/7905/

 

 

In these times there are probably not many left of this type. So it was fun to get a little old IWC history on my watchmaker bench. This pocket watch was dated made in 1904.

 

Morten:)

  • Like 1
Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

I enjoyed your post Morten. If IWC only made 600 of them it is indeed a rare beast and probably worth a fair bit.

With all these fishy things in the movement, it should have been a marine chronometer! :-)

Link to comment
Share on other sites
MortenS Watch Enthusiast

MortenS

Posted
  • Author
Posted

Hi Morten,

 

Welcome to the forum. Excellent report! I enjoyed it very much. I hope you'll find this forum an invaluable resource with its friendly and knowledgeable people.

 

Cheers,

 

Bob

Thank you Bob. I'm glad I found this place!:)

Link to comment
Share on other sites
  • 1 month later...
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Vertex Dirty Dozen crystal

      By Neverenoughwatches · Posted

      Does the lip stop the notched ring coming out caseback side ?
    • Gaz
      Hello from Bradford!

      By Gaz · Posted

      Hello everyone. My name is Gary.  I’ve been hobby fixing for just a few months now and have turned out several Seiko 7009A, 6309 and 7s26 movements with varying success.  my first movement was a tiny Cyma 424. (In at the deep end for size).  I’m currently working on a sentimental Garret ETA 2391 for my Father in law. 
    • B1N9S
      Vertex Dirty Dozen crystal

      By B1N9S · Posted

      Thanks for all the replies.  I'll investigate further.  I never noticed the lip and @Michael1962, I think I will have to form a tool to undo the ring and see what happens. I'll see if I can get some more pics.  
    • nevenbekriev
      Deciphering mainspring specifications…

      By nevenbekriev · Posted

      Hi John, The most important parameter of the spring is the thickness. The lenght is something that one would not consider as obligatory, as relatively big variations will not affect anything in significant way. The barrel size is related to the barrel and has nothing to do with the spring. Yes, the spring is designed to work in a barrel and the size of the barrel matters, but let this parameter be chosen by the movement manyfacturer, not by the sping manyfacturer who doesn't have idea in what kind of movement the spring will work. Sometimes the washer in which the spring arrives will be bigger than the barrel and there will be no way to just push the spring in the barrel and be happy. Well, if this is a problem for somebody, then probably He is a person with to many problems that will be verry hard to help to in any way. By the way, why You are changing the spring? Is the old one broken?
    • Waggy
      404 Club Reboot

      By Waggy · Posted

      Lets give it to the end of this month to get all the votes in, then we can call it?
×
×
  • Create New...