Jump to content

Seiko G757 Battery Clamp

Pip

By Pip
in Watch Repairs Help & Advice

 Share

Recommended Posts

Pip WRT Addict

Pip

Posted
Posted

I’ve tried looking most everywhere I can think of but to no avail. Does anyone have a knackered old Seiko G757 or parts of one sitting about as I need a battery clamp for one I’m working on.

 

Thanks in advance.

 

 

Sent from my iPad using Tapatalk

Link to comment
Share on other sites
Pip WRT Addict

Pip

Posted
  • Author
Posted
If you have the old clamp or draw a picture of it. Post it here and I'm sure members will be able to help you. I myself cant find a photo of one. 

It should look like this one:
8414604bf9f68746b302fcdc98a10020.jpg


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites
Pip WRT Addict

Pip

Posted
  • Author
Posted
I am happy to look in my parts box if needed....

I might have sourced one thank you, a friend on the other side of the world is going to check for me!


Sent from my iPhone using Tapatalk
Link to comment
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Terrinecold
      Suggestions for next steps?

      By Terrinecold · Posted

      Good then looks like the plan is a video of tear down and reassembly and lubrication of the ST36. I like the video too because I can show to my family and friends what new crazy hobby I have.
    • Pap3r
      What to look out for when buying a used watch cleaning machine?

      By Pap3r · Posted

      Great piece of kit. Is that a tin of oats? I see it looks like to be a macgyvered power drill. Nice. How did you control the speed? Don't tell me you hold it while it does all the cleaning cycles? Where did you get that nice mount and stand for the drill? Why was there a need for a step down transformer for 230V to 143V?? Does the hair dryer not get hot enough to melt the shellac on the pallet fork and such? That's a repurposed oven timer right? What's the white appliance? Cool. 
    • spectre6000
      Help connecting camera to microscope

      By spectre6000 · Posted

      I had the same issue. C to CS adapter: https://www.amazon.com/gp/product/B01FY70S4G/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Not sure where you're located, but your amazon link looks like a US market one, so that should work for you. I even got a 4-pack; one for each power, plus one for @gpraceman (did I give that to you already?) to complete his set. I'm not sure having one for each power is worth it, but they were cheap. 
    • dnhb
      Long Case Clock #2

      By dnhb · Posted

      Thanks OH. The name is William Burroughs, Chippenham. The brass plate is 12" across but the dial itself is 11.24" diameter. The case appears to be Oak (the hood remains at my friend's house). I can see many suspension springs on line but don't know what this one's specifications would be. Re Rochard's comnent, I could see how a chain loop could be used manually to turn a toothed day wheel but this one is toothed on the inside circumference!
    • Neverenoughwatches
      The watch

      By Neverenoughwatches · Posted

      1914 then lol This is a very difficult old watch for a beginner to tackle,  the case screws suggest it comes out from the front so the broken one is not going to prevent the movement from coming out now that it is broken.  The screw that you point to is a dial foot screw that only needs half a turn to release the dial foot from the screw's sharp shoulder that cuts into the foot. But honestly i would bag it up for another time until you are ready. If you lose anything from this while taking it apart and you almost certainly will, you may well struggle to find a replacement, seriously this is too sentimental to mess with just yet. Beginners perception of what is involved can be way way off what is reality.
×
×
  • Create New...