Jump to content

Working On A New Cd For The New Year...

WillFly
 Share

Recommended Posts

WillFly Distinguished Member

WillFly

Posted
Posted

Me and my  mate Chris "Wolfie" Wolferstan are putting together tracks for a new CD, which we hope to get out for 2015. We've got a number of club dates coming up and it's always good to have some merchandise to bring along. We're just over halfway through at the moment - a mix of ragtime fingerpicking, 1930s jazz and some blues stuff. Here's a sample of what we're up to:

 

https://soundcloud.com/will-fly/louisiana-fairytale

 

Cheers,

 

Will

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

I fair enjoyed that Will, lovely guitar sound made better by the fact that I just happened to have my earphones plugged in when I came across the post. The two of you work swell together, It feels like you are "Sitting on top of the world"!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Kkramme
      Blew it with a coil

      By Kkramme · Posted

      [Myota2034] Custom simple quartz watch — PricewaterhouseCoopers On a very very different note, here is a watch from approximately 2000 when I was a Partner with PwC, Management Consulting. It was a simple “marketing watch” with a clever “vase of knowledge” that is subtly revealed on the dial as the second hand progresses. Clever for a simple watch!⌚️
    • Neverenoughwatches
      Mainspring winder question.

      By Neverenoughwatches · Posted

      I think someone else has though. Some where here using a modified perspex sheet. I may be wrong i may be right , i think it involved fitting the arbor to a pin vice. I dont have experience of the bergeon winders, are the handles not interchangeable ?
    • Neverenoughwatches
      Dial Dots

      By Neverenoughwatches · Posted

      Never tried dial dots, i always considered them as a bit of a bodge.  You are adding something that was never intended to be there. I wonder how the adhesive reacts to any part of the movement, hot summer heat and i think things might turn sticky. Most adhesive backed stuff has a tendency to soften and slide around so it may spread, i have used a lot of so called sticks all adhesives in my industry that are just not up to the job. I suppose they get you out of a problem quickly, but how permanently might that be ? I would just explain to the owner that it may or may not work. WWs other ideas are a much more permanent solution but both have their risks . I've tried milling and dial feet replacements, hmm it was ok, ive heard of folk dimpling the face , so that needs care . And i have soldered a few times , all with good results but i am very careful and I practiced it a lot.
    • Cmmb8519
      ETA 9362 check electronic module

      By Cmmb8519 · Posted

      Thanks very much watchweasol. A couple more dummy questions. What do you mean by 'cut block'? and to see if there is pulse on the chip, which contacts on the chip should I connect the multimeter? Many thanks
    • tomh207
      Mechatronics Engineering v Mechanical Engineering

      By tomh207 · Posted

      It’s definitely a field that is not understood but is probably now the most important in manufacturing with the huge amount of automation and robotics being applied.   Tom
×
×
  • Create New...