Jump to content

Recommended Posts

Posted

Hi everyone I’m Steven. Artist designer jack of all trades I like taking things apart and seeing how they work and I make jewellery. Looking into designing a watch line, watches and jewellery are similar to a point yet so different so I’m looking to expand my knowledge, meet new people and learn new things to facilitate my endeavours. My first question is about a repair to a watch I recently purchased in Spain. Now it’s nothing special but I came across a jewellery shop and this watch caught my eye. See enclosed pics I undid it and part of the strap came off from the push pins then the buckle part of the strap did the same. Now she did attempt to fix it and showed me other straps to put on the face none of which I liked none had the colour and design that attracted me to the shop window in the first place so anyway I got another but I went back and tried to swap it back for the broken one because I really wanted it and nothing else there was even close in design. So long story short she just gave it to me I said I try fix so I think she used loctite on it and said leave for one hour don’t wear. Needless to say it came apart the plastic strap is flexible so I would say that the glue wasn’t obviously suitable for a flexible moving part. I did just get a two part epoxy resin but I am wondering what I can do that she couldn’t wouldn’t or didn’t kinda putting a few options together till I think I find the most appropriate. Find enclosed pictures of what I mean hopefully you will see what attracted my eye to it I just really like it I do not want a different strap on the face and nothing really matched well in the swatch book she showed me I’m not sure what the issue was but she couldn’t get a strap to go onto it anyway so decided that it was a lost cause I really hope not because I just love it I know that sounds silly but I really do9EE3480A-E2D2-41AF-A614-928DC8C2576D.thumb.jpeg.4f77db4d09e03882a632bba8b6c16d42.jpeg. Thanks so much guys

7AB8BF5B-2316-472D-9DAC-7E7825DF32C5.jpeg

32B7C4FC-1FC5-4F37-B958-284462D436EE.jpeg

A7315B25-9FED-4B6A-BC2E-79BCF4673884.jpeg

B257B2B1-D82F-46A1-9F1F-976681D469D0.jpeg

82C7FB2F-8552-4348-BFEE-C738C3C1F0D4.jpeg

4F229B3D-1823-4615-A813-6D37ADBA37CF.jpeg

D2D13F9B-5F8C-41C2-8C9F-E69E74D55115.jpeg

D6EA3442-4384-47F8-9CDB-6B7A9C2233C8.jpeg

Posted

Hi iMango,  Bless my soul! What ever is going on? Watch looks OK but straps, adhesives, and now a dremel ? It appears to be a simple job to me, clean it all up and NOT with the dremel,  then fit a decent leather strap. Regards, Mike.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Thanks for that Andy, Yes the new bracelet is worth more than the watch itself, Its one I have bought to service and clean-up and on-sell it as a project, look it may sell to someone who has a small wrist, I think I will buy an extender and may-be offer it up with a normal strap as well CJ
    • Not always that simple. Typically the only reason we would have any way of identifying a watch is if parts were available at any time and somebody had a parts reference book then they would help you to identify the watches that they have parts or. Unfortunately there are hundreds of thousands of watch movements with no identification and of course typically no parts the classic place were watches would be identified would be under the balance wheel and your pictures don't really show a good view of that. Occasionally I've seen watches marked under one of the plates. They felt very proud of their watch is a very prominent Swiss company and they ask he stamped the bottom of a plate so you have disassembled find it. Then there is the other system the keyless parts make up something called the fingerprint system but you still haven't given us enough information to make use of that. Here's an image showing what a fingerprint system looks like. The PDF is based on the physical book the physical book has sizes of watches these are smaller ladies watches and keyless parts which in the physical book are printed at the actual size of the watch parts. So to identify with the keyless we need in your case diameter measured on the dial side and a good picture of the keyless parts and then you have to hope that this was made within the right time span of the books that have this system on the other hand a lot of times on the dial side they will also put markings. So basically to identify a movement it has to come out of the case and has to be disassembled.
    • The strap is a 44Q6JB and hadn't realised how much they'd gone up in price. The used one I've got is very worn but may have other links floating around.
    • @Mercurial is this also a variation of the tool you posted? 
    • Thanks Andy, The bracelet is sized very small, around a 14cm wrist. Were would one try to source original links, I guess they wouldn't be cheap if found. The bracelet end links have 4406 B-E stamped on them, is this the Seiko Bracelet code ?? CJ  
×
×
  • Create New...