Jump to content

looking for smith in NW Oregon

NotintoHorology
 Share

Recommended Posts

NotintoHorology New Member

NotintoHorology

Posted
Posted

looking for a Smith in NW. Oregon . Did not know ? . if your website has a geographical list of Site-members listed, of qualified service and repair  ?

Someone local if possible for straight forward service/repair . 1941, Raymond Elgin, Pocket/open face / railroad grade .
Just need crystal replacement looks to be around a 60mm . did have a balance wheel cut and replaced years back and watch is working order and keeps time . one of Elgin open-face models that you unscrew bezel and then pull lever hidden under bezel edge to set, was also set-up with 24-hour wind spring .
not looking for 3rd party, someone to give watch to, and then that person send out of state . but find someone in-state if possible .

If can help with info, just give me a PM here on the site, and I think I will get a message notification on my email address I provided in log-in info . or email if my personal info shows my email contact . And I will also log-in a few days to check if anyone has info .

....thanks
.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • diveboy
      404 Club

      By diveboy · Posted

      $12.50 + $6.00 shipping I do enjoy collecting ladies watches.
    • VWatchie
      Chinese clone demagnetizers

      By VWatchie · Posted

      What voltage are you feeding it?
    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      Maybe you had a bad one H, the cheap blue one i use has been fine for nearly 3 years now. It demags enough to stop the tiniest of screws sticking to the carbon steel tweezers i use. If it were to fail at some point in the future i very  probably would go up a level of device just because. 
    • tomh207
      Chinese clone demagnetizers

      By tomh207 · Posted

      Lot of “industrial “ de magnifiers on Aliexpress  https://www.aliexpress.com/item/1005004699640024.html?src=google&src=google&albch=shopping&acnt=708-803-3821&slnk=&plac=&mtctp=&albbt=Google_7_shopping&albagn=888888&isSmbAutoCall=false&needSmbHouyi=false&albcp=17858129175&albag=&trgt=&crea=en1005004699640024&netw=x&device=c&albpg=&albpd=en1005004699640024&gad_source=1&gclid=CjwKCAjwo6GyBhBwEiwAzQTmcxIEVpMt1vFIKQyfjVwT95zrBsOi5dt-GgFOmLamBcMcu4tO7CfaaxoChnEQAvD_BwE&gclsrc=aw.ds&aff_fcid=b7140f118e144db7876d074872aec9cb-1716029308364-08531-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=b7140f118e144db7876d074872aec9cb-1716029308364-08531-UneMJZVf&terminal_id=6b7c60e41b044cb39d1431f62cda0958&afSmartRedirect=y   a hard drive wiper/degauser would also be worth looking at.   Tom
    • VWatchie
      Chinese clone demagnetizers

      By VWatchie · Posted

      Unfortunately yes! Magnetism can wreak havoc on a mechanical watch movement if the balance hairspring becomes magnetised. The cheap blue Chinese demagnetise-rs are useless if you feed them the wrong voltage (> 110 V), and even so, they don't work very well. The one I got when I was new worked so poorly that it drove me nuts. Eventually, I was lucky to get a Greiner Magnomatic for a little money. It's an amazing tool that can be trusted to do its job perfectly in seconds. A new one comes with a price tag of  £885 excluding tax and shipping, and if you think that's a bit steep (I believe most of us would) and can't find a used one I'd go with @Jon's recommendation.
×
×
  • Create New...