Jump to content

Longines 284 parts needed

Wesley881

By Wesley881
in Watch Repairs Help & Advice

 Share

Recommended Posts

Wesley881 Watch Enthusiast

Wesley881

Posted
Posted

Hello all,

 

I've received a Longines Cal 284 that took a punch on the nose many years ago and the center (seconds) wheel has a bent shaft. The second hand is non existent. I'm submitting a parts request to Otto Frei but also wanted to reach out and see if someone has these parts available or a scrap movement.

 

Thanks as always for the continued support.

 

Chad

 

Sent from my SM-G920V using Tapatalk

 

 

Link to comment
Share on other sites
Wesley881 Watch Enthusiast

Wesley881

Posted
  • Author
Posted
Excellent! Thank you! Apparently the 280 was the 'base model' with 281 having date, 284 and excenter regulator, and the 285 like the 284 with date. This should work.

Best regards,

Chad

Sent from my SM-G920V using Tapatalk

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Absolutely WW ,  i know you speak for us all when you say this. So Mark,  Old hippy, other moderators, the pros and the old timers, yes you especially WW. The ones that always help us out with advice, give up their time for us and never ask for anything in return. Cheers me dears.
    • tomh207
      Without Our Forum

      By tomh207 · Posted

      I have to add my thanks to @Mark for all he does here and his other site. It was Marks YouTube channel which got me into the track of the possibilities of repairing my own watches and servicing them. If I can help out at all as a moderator I volunteer wholeheartedly.   Tom
    • watchweasol
      Without Our Forum

      By watchweasol · Posted

      Well Gentlemen and Ladies I think we should thank @Mark for his posts putting our minds to rest and the explanation of running the site which is done very well. As a resource for watch repairs for new and old I would rate it second to none, the casual banter and dissemination of information  top notch, let us ll enjoy working on here and helping others. Any one can PM me as Iam sure others as well if it has to off the “record” and Marks blessing on that.   We appreciate that Mark is a busy man and totally appreciate what he does for us all.    So from me THANK YOU MARK. from an old timer.
    • watchweasol
      Dial Dots

      By watchweasol · Posted

      Hi it depends on the watch. The ones with the day date complications  dial dots are not really any good as you have difficulty getting the clearance between day date wheels a the dial.  Dial feet can be fitted no problem, there are several options, the cheapest is to mill out where the foot is and glue a new foot on. ( available fron Cousins UK ) mterialhouse . Or solder on a new foot, only problem with that is you need great care not to mark the dial. I use a DIY. Dial foot machine works no problem.
    • Neverenoughwatches
      404 Club

      By Neverenoughwatches · Posted

      If everything is inside them, then once restored and keeping time the oris could be worth 20 -30 each, I've paid a lot more Oris date pointers in the past. Bought this last week for a quid at a carboot sale. A cute little Smiths made in England alarm clock. The alarm didn’t function properly because the movement wasn't fastened in. But it runs perfectly now, the previous made a bit of a mess of the dial but i still love it. For the Smiths lovers here's  a picture of the inside before i case it up again. Still with it the original Jewellers box.
×
×
  • Create New...