Jump to content

How do you remove stuborn screws ?

Chopin

By Chopin
in Watch Repairs Help & Advice

 Share

Recommended Posts

Nucejoe Distinguished Member

Nucejoe

Posted
Posted

 Most base metals interact with  moisture which often results in expansion of the metal,  rust. Obviously is such cases screw head might pop off if you force it, no matter how well you have dressed the driver, the issue is with the expansion and rust, not inadequate  force.

Rust is the base metal molecules plus moisture molecule therefor  you have a heavier and often bigger molecule, thus expansion.

I have always had success with soaking the piece in CocaCola for 48hrs, the acid ( phospheric) dissolves oil and rust.

Just try it and see for yourself.

Rgds

 

  • Thanks 1
Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • rossjackson01
      Without Our Forum

      By rossjackson01 · Posted

      Thinking.  Mark has said he would be here for the foreseeable.  I have looked at other watch forums. One will not let me join as my 'browser' is not set? Another feels very complicated. Another has showing of collections of Rolex etc, all vying to show what they have. Not what they do for watch servicing. And, the criticism of others is so prevalent.  I asked a question and received, "Read a book more often" as a reply. I was given advice and constructive criticism by members, who advised the book, but realised as a result of my dyslexia, my difficulties. And so spent time assisting me.  I like and enjoy this forum. I am at 2 1/2 years into my self imposed 5 year apprenticeship. Averaging 10 hrs per week. I can do virtually anything that needs to be done. I still lack some tools. DIY skills makes a lot of things available to me. Someone made the comment about 'Facebook'? Open my life for the inspection of others? No thank you.
    • Neverenoughwatches
      AS 554 from 1930

      By Neverenoughwatches · Posted

      Come on chaps i need some ideas, i have the right staff for the movement, i can probably make up another hairspring and balance wheel with some effort involved, which might not run time accurate but i can deal with that. What I'm really stuck with is an oversized roller hole to fit onto the staff. I cant make a roller, so i have to make this one fit, which is looking like a fastening in repair with adhesive.  Getting the staff in centrally is going to be difficult, I'm guessing the space around the staff is about 50 microns. My other option is to track down a different staff with a better roller fitting profile but match profile sizes elsewhere,  or another correct roller, I'm sure this one has been broached out. It may not even be the correct roller, the staff sits really low inside it. I could just rodico the roller on and then test to see how it interacts with the fork.
    • RichardHarris123
      Vertex Dirty Dozen retainer ring

      By RichardHarris123 · Posted

      I've looked, they don't seem to make the same type anymore. 
    • Neverenoughwatches
      Vertex Dirty Dozen retainer ring

      By Neverenoughwatches · Posted

      I doubt you will find an original, i do have a 59 in a different case , I'll have to dig it out and have a look . I think you are stuck with manufacturing something. 
    • Neverenoughwatches
      Questions about my Bravingtons Renown Mantel Clock

      By Neverenoughwatches · Posted

      I think my missus is mad ironing clothes,  but what do i know ?
×
×
  • Create New...