Jump to content

Showing off the workbench I just made

NickP

By NickP
in Tools & Equipment

 Share

Recommended Posts

NickP Member

NickP

Posted
Posted (edited)

Like a proud father, I feel the urge to show off my latest creation.

We recently moved to a new house which finally gave me the space to have an office/workshop. I have been working on a tiny little homemade bench the past few years and have been dreaming of a proper bench. Sadly the ready made ones I wanted are way out of my league.

My design goals were:

  1. Affordable
  2. versatile
  3. Free standing (i rent the house and cant drill bolts into the walls)
  4. Sturdy

I got the original inspiration from Dan Spitz. http://danspitz.com/for-sale/  

His concept is to make stunning workbench tops. You then supply the legs. However at £2,000 for the top, there was that budget thing again. I did however steal his idea (I don't actually know if he or someone else came up with it) of the routed groove along the edge. It has already proved to be a godsend in terms of catching small screws, and the odd tool. I decided to add a perspex screen on the back and down one side as I am notoriously rubbish at not flicking click springs etc across the room.

So, the basics.

Worktop: 40mm solid Beech kitchen work surface from Ebay 2000mm x 620mm - £85

Legs: Steel workbench legs from Machine Mart about £40 including shipping

Bench support: 2 L shaped steel struts from an old Victorian bed. £5.00 from a salvage yard, cleaned up with an angle grinder then polished.

Struts: 30mm square steel tubing from steel merchant £20.00

Danish oil for bare wood: £5.00 (four coats on either side)

£20 for bolts and screws.

So I made the whole thing for well under £200.

The top is extremely heavy and I haven't totally managed to eradicate minimal side movement and ideally I would bolt it to the wall but as I said I can't. Still it isn't going anywhere and I love it.

Of course you don't have to make it 2m long but I wanted somewhere for my lathe. I am building a perspex divider to protect the workbench from cuttings from the lathe.

Anyway, I hope it might give some of you some ideas.

IMG_8103.JPG

IMG_8109.JPG

IMG_8108.JPG

IMG_8106.JPG

IMG_8107.JPG

 

Edited by NickP
  • Like 9
chrisdt WRT Addict

chrisdt

Posted
Posted

Hi Nick

That looks really nice.... Natural light helps too. I see you have carpet...Hope youve got a big magnet....My daughter has left home (ah sad) but the upside is Ive moved my watchmaking gear in. Ive just finished my new bench too. it was an old pine desk purchased at auction for very little money. How can they justify £2000 for a top without legs? Here is a pic of mine.

Chris

 

IMG_20170213_203759_01.jpg

  • Like 1
NickP Member

NickP

Posted
  • Author
Posted

Hi Chris,

That looks great. :)

I like the lighting you use. Yes carpet is a big issue. I do have a good magnet actually, but I was taught quite a clever technique of putting a stocking over a dyson hand held vacuum. Works pretty well too.

I need more drawer space too, which you seem to have plenty of.

  • Like 1
chrisdt WRT Addict

chrisdt

Posted
Posted

Hi Nick

You did mention side movement on your bench. When I built a workbench out of angle iron for my outside workshop I had the same problem. You need a couple of 'diagonals' perhaps at the back between the leg uprights and the top base. This would stop it trying to diamond out so to speak. 1/2 inch angle or box section would be ok and would eliminate the side movement you mention. Anyway you probably know all this.

Chris

 

NickP Member

NickP

Posted
  • Author
Posted
8 minutes ago, chrisdt said:

Hi Nick

You did mention side movement on your bench. When I built a workbench out of angle iron for my outside workshop I had the same problem. You need a couple of 'diagonals' perhaps at the back between the leg uprights and the top base. This would stop it trying to diamond out so to speak. 1/2 inch angle or box section would be ok and would eliminate the side movement you mention. Anyway you probably know all this.

Chris

 

Thanks Chris,

So far it is very light, but need to see what happens when I start using the lathe. I shall certainly consider diagonals if I get a problem. Thanks again

Cad101 Super WRT Addict

Cad101

Posted
Posted

That's a very nice bench indeed. You could stop any lateral movement with as @chrisdt says a full diagonal across the back but also a couple of knee braces would work one in either corner at the top about halfway down the leg at 45 degrees that should stop any movement.

 

  • Like 1
SSTEEL Distinguished Member

SSTEEL

Posted
Posted

Great work, simplistic, yet very functional.  I've recently completed my workshop remodel, but won't post photos here as they are posted elsewhere in the forums.

  • Like 1
  • 3 weeks later...
WileyDave WRT Addict

WileyDave

Posted
Posted

Very nice bench NickP AND room has a view! you could probably find some drawers that would fit between crossmembers and top. I especially like the clear Lucite wrap around parts catcher! :)

Dave

NickP Member

NickP

Posted
  • Author
Posted
4 hours ago, WileyDave said:

Very nice bench NickP AND room has a view! you could probably find some drawers that would fit between crossmembers and top. I especially like the clear Lucite wrap around parts catcher! :)

Dave

Thanks for the kind words Dave. The parts catcher is essential for me. I have a bad habit of flicking things across the room :)

as for the drawers I am constantly on the lookout for how I can do that. I totally agree with you.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Looking to try servicing an old movement

      By Neverenoughwatches · Posted

      Its good to understand how and why demagnetisers work. These two pieces of text explain in basic terms how ferrous metal is affected by magnetism and why they can retain some of those properties.  The cheap demagnetiser is actually a magnetiser,but is used in a way that can remove the weak magnetic properties that a steel has gained through magnetic field exposure. 
    • tIB
      Another 6105 back in action!

      By tIB · Posted

      Yeah, agree on the rotation thing - I'll use this as my work beater, and rotate between the others outside of that I think.  The 'problem' is with these that in many cases the parts are worth more separately than in a bad example: assume the bezel, dial and movement the same seller is getting rid of came from the same watch... If he sells them all he'll get a similar price to a really good condition example.  There's a good side to that though - it means you can often find the odd bit you need. And I paid less for this case and crystal assembly than I did for a crystal and dial holding ring I bought for another project, so there's still value to be had occasionally.   
    • LittleWatchShop
      Looking to try servicing an old movement

      By LittleWatchShop · Posted

      Cheap ginger counters will tell you if you have radium, but don't waste your money and don't worry about it.
    • rehajm
      Another 6105 back in action!

      By rehajm · Posted

      Nice rescue. I like when a few with heavy patina are worn in rotation with nicer watches of a collection. Frankens, too so long as they aren’t passed off as something else. My experience with these Seikos is they tended to disintegrate on their own so finding correct parts to put an original together is near impossible…
    • tomh207
      Looking to try servicing an old movement

      By tomh207 · Posted

      Some answers from my view screwdrivers - if the bodies are ok for you maybe only look at changing the blades if possible, probably 100 and 140 first. loupes - 3-3.5 is what is normally recommended for disassembly and assembly, 10x for inspection  digital microscope - not great for working on movements as there is no depth perception, great for inspection and taking photos to post here 😀 automatic oilers - a bite marmite/vegemite at times, various opinions, some swear by them, some use them only for certain jewel settings others don’t care for them at all. They are not at all necessary, the usual alix etc. ones are fine and you don’t need to spend a fortune. They are very subjective though, you may end up making your own from a needle and peg wood because you like it just so.   can’t help with the Geiger counter, I’m one of the ones who don’t get freaked out about it. There is a legitimate concern, however as long as your not licking the dials/hands, or snorting the degraded old powder you are likely to be absolutely fine.   Tom
×
×
  • Create New...