Jump to content

Case Screw Size

aronmosh
 Share

Recommended Posts

WillFly Distinguished Member

WillFly

Posted
Posted

Presumably there's more than 1 screw in the case back. If you can take out a second screw and get the measurements, then it should be possible to order a replacement for the missing one - which I assume has been lost.

Link to comment
Share on other sites
bobm12 Distinguished Member

bobm12

Posted
Posted

Alternatively, you may want to check with a supplier or consult a maintenance chart from the manufacturer if available. Either way the part number for the screw in question may be found and ordered since you have all the information (caliber and maker).

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Rustinbox
      Omega Split stem issue (will not go back in)

      By Rustinbox · Posted

      Bringing this old thread back to life, as I have similar problem. I did follow this advice, but while inserting a male stem (crown side) and just pushed it to the female part, and the fork (female side) of the stem has broken. What is the right way? Push the stem part so it widens the gap and fits in? Why it was then receiving side got broken? Old metal? It is a vintage watch from late 60s.    or the outer part should be inserted somehow from the side (slipping to the gap), but I don’t have space there for this manipulation. The watch is Orient Fineness monocoque case.   thank you!  
    • Neverenoughwatches
      Winding pinion making

      By Neverenoughwatches · Posted

      Thats insane Nev that you cut those tiny pinion teeth with a cutter you designed and made. 
    • Neverenoughwatches
      AS 554 from 1930

      By Neverenoughwatches · Posted

      I certainly do Razz. Ive just started work on this AS554, interestingly enough it had a paper dial made from a postcard , look at the brand name on the dial, very curious. 
    • Kkramme
      Watch of Today

      By Kkramme · Posted

      [SBGA405] Grand Seiko “Godzilla” Spring DriveI always enjoy coming back at the end of the week to my first Spring Drive watch which is a combined automatic mechanical watch and a high quality quartz — a Spring Drive.Impressive accuracy (10 seconds per month) and wears remarkably comfortable at 44.5 mm in diameter and 95 gm.Love the power reserve indicator, and the colour of the dial amd the watch band.One of my “perfect” watches!!😍
    • Neverenoughwatches
      Generic screws for unknown movements

      By Neverenoughwatches · Posted

      Yep, so we got a 10 1/2  ligne movement, thats the starting point now these bad boys books should hopefully get us across the finishing line . Next we need a good clear picture of that rocking bar, the setting lever and the setting lever spring. I've already got an idea what it might be.  
×
×
  • Create New...